Cuttter

Printing 11x17 in Inkscape Problem

Recommended Posts

I have been trying to print from inkscape over and over again my problom is the size I am trying to print is 11x17, each time it prints an 8.5x11, no matter if I change the document size to 11x17 manually or even choose the correct setting in the printer setup. If any one has had this issue and corrected it, please let me know what you did to correct it.

Share this post


Link to post
Share on other sites

I have been trying to print from inkscape over and over again my problom is the size I am trying to print is 11x17, each time it prints an 8.5x11, no matter if I change the document size to 11x17 manually or even choose the correct setting in the printer setup. If any one has had this issue and corrected it, please let me know what you did to correct it.

Never tried it because it's so easy in Sign Blazer why not give that a try?

Share this post


Link to post
Share on other sites

You changed the setting in Inkscape to 11" x 17", BUT did you change the setting in the print dialog box? Check that out. Maybe it is set to print in 8.5" x 11" which is the standard.

Share this post


Link to post
Share on other sites

I have been trying to print from inkscape over and over again my problom is the size I am trying to print is 11x17, each time it prints an 8.5x11, no matter if I change the document size to 11x17 manually or even choose the correct setting in the printer setup. If any one has had this issue and corrected it, please let me know what you did to correct it.

Never tried it because it's so easy in Sign Blazer why not give that a try?

I will give it a try.

Share this post


Link to post
Share on other sites

I have been trying to print from inkscape over and over again my problom is the size I am trying to print is 11x17, each time it prints an 8.5x11, no matter if I change the document size to 11x17 manually or even choose the correct setting in the printer setup. If any one has had this issue and corrected it, please let me know what you did to correct it.

Never tried it because it's so easy in Sign Blazer why not give that a try?

I will give it a try.

If you need anymore help let me know

Share this post


Link to post
Share on other sites

I have been trying to print from inkscape over and over again my problom is the size I am trying to print is 11x17, each time it prints an 8.5x11, no matter if I change the document size to 11x17 manually or even choose the correct setting in the printer setup. If any one has had this issue and corrected it, please let me know what you did to correct it.

Never tried it because it's so easy in Sign Blazer why not give that a try?

I will give it a try.

If you need anymore help let me know

That didn't work either, the image is sqewed with lines across the entire image. I have posted an image.

post-2074-12986554206179_thumb.jpg

post-2074-12986554218414_thumb.jpg

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now