US Cutter MH721 on Windows 7?

[insanevinyls 0]

Is there a driver or something I'm missing here to setup a MH721 on Windows 7 64 bit?

I have been searching the forums for the past hour and haven't gotten anywhere with the drivers on the disk or from this website.

Can somebody please point me in the correct direction as I don't have a lot of time to dink with drivers and need to get to cutting vinyls for my buddies race car. He has a race in 2 weeks!

Thank You!

[sniderman 8]

how are you connecting the plotter,, what cable are u using

[hockeygirl 30]

You can always run XP compatibility mode in Win 7 if all else fails

[insanevinyls 0]

I finally got it working with the COM cable. Is there anyway to make it work with a USB cable so I can use it on my laptop?

[Peachykeen 0]

See discussion here...

http://forum.uscutter.com/index.php/topic,27900.0.html

[sniderman 8]

here u go:::  http://www.customracingdecal.com/manuals/Noob-V4_9.pdf

it works,, i used it to hook my laptop to my mh721

[insanevinyls 0]

I will give it a go

[Guest HowardI]

One thing to keep in mind is the chip in the cutter.

If you can use the FTDI driver from the support website you're good.  If you have to use the cutting plotter driver you will not be able to use any 64 bit OS, nor will it work with win 7.

You can replace the I/O board or get a Keyspan USB to serial adapter (from walmart.com unbelievably).

Howard Irwin

Support Specialist

US Cutter

425-481-3555

888-298-8143

  - Option 2