Guest YHC Posted April 28, 2010 LOL sorry t.schultz, I to was ranting about the other post which was pointing out that there are allot of people that jump the gun when first getting into this. Again, hope it all works out for you. FWIW my comment was not directed at you necessarily, just the other comment caught my eye with ire for other memebers. Carry on... Share this post Link to post Share on other sites
MZ SKEETER 4,708 Posted April 28, 2010 mine wasn't either, it was about people in general, who don't want to take the time to do their homework, and there are numereous ones, and many will join the forum AFTER they make a purchase, because they have NO CLUE of even where to begin. NOT A CLUE of even how a decal is made, They see someone else selling decals and think it is so simple. Share this post Link to post Share on other sites
t.schultz 0 Posted April 29, 2010 It's cool. I just wanted to make a point that Im not new to this. And I have contacted uscutter. But still have not heard anything back. It sucks that I can not really call during the day because I work a normal 9-5 job. I just want this worked out. I got more orders coming in and I can not be down any more. Share this post Link to post Share on other sites
t.schultz 0 Posted May 2, 2010 These are the pics from tonight with the pen plot. So I don't know what else to do.... Share this post Link to post Share on other sites
BannerJohn 1,324 Posted May 3, 2010 if your cutter is still under warranty..send it back and have it fixed or ask for a replacement. That is the best advice I can give. This looks like a hardware issue to me, and it's not the first time we've seen it. Share this post Link to post Share on other sites
t.schultz 0 Posted May 3, 2010 I would but I can not get a hold of any one. No one replied back to my emails. I will call again today. Share this post Link to post Share on other sites
MZ SKEETER 4,708 Posted May 3, 2010 CALL, CALL, CALL . best bet.. Share this post Link to post Share on other sites
t.schultz 0 Posted May 3, 2010 I try lol. I guess I'll keep on it tomorrow. Share this post Link to post Share on other sites
BannerJohn 1,324 Posted May 3, 2010 Brandon Davis is head of tech Support..try him.And good luck. Share this post Link to post Share on other sites
t.schultz 0 Posted May 4, 2010 Just talked to levi. Getting everythig fixed tonight, hopefully! Thanks Levi Share this post Link to post Share on other sites
Dakotagrafx 7,297 Posted May 5, 2010 Levi is a great person for helping! Share this post Link to post Share on other sites
BannerJohn 1,324 Posted May 5, 2010 Levi is a great person for helping! true..he does the best he can. Share this post Link to post Share on other sites
t.schultz 0 Posted May 9, 2010 We keep missing each other. However I did talk to him. I think we are going to RMA the plotter. Share this post Link to post Share on other sites
t.schultz 0 Posted June 10, 2010 Well sent off the plotter... Still doing the same thing. but it's not as bad... but I will be in contact with them again to get a refund. I will take my money else where and get another plotter. Share this post Link to post Share on other sites
Dakotagrafx 7,297 Posted June 10, 2010 may you have better luck with the next plotter. Share this post Link to post Share on other sites
rrc1962 0 Posted June 10, 2010 Well sent off the plotter... Still doing the same thing. but it's not as bad... but I will be in contact with them again to get a refund. I will take my money else where and get another plotter. Don't get an R series Vinyl Express. I didn't even get past pen tests before sending it back. Did you change the driver in Flexi to the Roland PLC1000 driver? Did you try another cutting program? If you are using a USB connection, switch to serial. Share this post Link to post Share on other sites
t.schultz 0 Posted August 25, 2010 Well sent off the plotter... Still doing the same thing. but it's not as bad... but I will be in contact with them again to get a refund. I will take my money else where and get another plotter. Don't get an R series Vinyl Express. I didn't even get past pen tests before sending it back. Did you change the driver in Flexi to the Roland PLC1000 driver? Did you try another cutting program? If you are using a USB connection, switch to serial. They refused to give my money back. After I got it back, it was still messed up. So needless to say, I will never do business again with US Cutter. I have since put that plotter back in box, and it is a huge paper weight for me now. I have a Graphtec now. So I have a MH plotter for sale! Really cheap! Share this post Link to post Share on other sites
Dakotagrafx 7,297 Posted August 25, 2010 Well sent off the plotter... Still doing the same thing. but it's not as bad... but I will be in contact with them again to get a refund. I will take my money else where and get another plotter. Don't get an R series Vinyl Express. I didn't even get past pen tests before sending it back. Did you change the driver in Flexi to the Roland PLC1000 driver? Did you try another cutting program? If you are using a USB connection, switch to serial. They refused to give my money back. After I got it back, it was still messed up. So needless to say, I will never do business again with US Cutter. I have since put that plotter back in box, and it is a huge paper weight for me now. I have a Graphtec now. So I have a MH plotter for sale! Really cheap! 65.00 shipped! Share this post Link to post Share on other sites
t.schultz 0 Posted August 27, 2010 I might have to take you up on that! But you pay for shipping Share this post Link to post Share on other sites
Dakotagrafx 7,297 Posted August 27, 2010 how much is shipping to 49036 Share this post Link to post Share on other sites
t.schultz 0 Posted August 30, 2010 I would guess around 30 bucks or so. Share this post Link to post Share on other sites
deth502 39 Posted August 30, 2010 if daktota dosent want it, ill give you $100 shipped for it. ($65+"around $30") Share this post Link to post Share on other sites
Dakotagrafx 7,297 Posted August 30, 2010 That's better than my offer! Share this post Link to post Share on other sites
deth502 39 Posted August 30, 2010 That's better than my offer! WHOA!! i wasnt offering MORE!! just rounding off!! im too cheap to try to outbid someone!! Share this post Link to post Share on other sites