reverse Clock face

[bret2973 0]

anyone have the face of the clock but backwards? I just got my clock to go backwards and wanted to get a face to go in the clock not really sure if I can do it or if it has to be a certain inch between numbers ect?

thanks

Bret

[Team Satan 1]

heres two, all you gotta do is just reverse the file and cut

clock face 01.eps

clock.eps

clock face 01.eps

clock.eps

[deth502 39]

just take any clock face and there should be an option to reverse it in whatever cutter program your using.

the size and/or distance between anything dosent matter. a clock is read by the angle of the hand from the center, and no matter what size you scale it to , the angle will remain the same, as long as you do not distort the image.

[knucklehead 530]

I don't think he's wanting it mirrored. I've seen those clocks, the one (1) is where 11 oclock would be, 2 is where 10 oclock should be, 3 is 9 and so forth. The clock runs counter clockwise.

[deth502 39]

yes, exactly, and they are mirrored.

the idea is for the clock to be read and appear normally in a mirror. started out in barber shops so the person looking in the mirror having their hair cut could read a clock on the wall beind them.

[knucklehead 530]

OK, the ones I saw were just a regular clock that ran backwards. I guess the OP needs to chime in, and state what he's wanting.

[JoeBlow 5]

This is what he's after.

[mustangconv85 0]

here

reverse clock.eps

reverse clock 2.eps

reverse clock.eps

reverse clock 2.eps