Lou 0 Posted March 11, 2010 Hi My problem is that whenever I remove the backing from the cut vinyl the back paper (graph) keeps sticking to the vinyl letters. It doesn't come off in a full piece like it should. What can I do to correct this? I have a MH871. Thanks for your help Lou Share this post Link to post Share on other sites
jhelms 5 Posted March 11, 2010 sounds like your blade is to deep try less pressure jhelms Share this post Link to post Share on other sites
BannerJohn 1,324 Posted March 11, 2010 sounds like your blade is to deep try less pressure jhelms I agree. The blade is cutting into the paper. If less pressure doesn't work, try less blade out. Share this post Link to post Share on other sites
Lou 0 Posted March 11, 2010 how do i adjust the pressure Share this post Link to post Share on other sites
CKR 0 Posted March 11, 2010 One thing you may need to do is the set the blade so it is about half of the thickness of a credit card, also you may have the blade pressure set to high. Unscrew the end of the blade holder. You will have to find your way on the cutter menu and scroll till you find the one that says pressure and back off the number. Share this post Link to post Share on other sites
Dakotagrafx 7,297 Posted March 11, 2010 how do i adjust the pressure Lou a great place to start with settings is to read the new bie manual - it will help you get to know your equipment http://forum.uscutter.com/index.php/topic,17489.0.html Share this post Link to post Share on other sites
Team Satan 1 Posted March 11, 2010 Is there a test cut button on your cutter? If so, play around with the blade depth until your happy with it. Share this post Link to post Share on other sites