Sherri Jackson 0 Posted March 3, 2010 I am looking at purchasing a vinyl cutter and was wanting to know which model is recommended. I am looking at either the MH 25" or the PCUT 24". Thanks for any info you can give me. Sherri Share this post Link to post Share on other sites
mabscotthandyman 1,410 Posted March 4, 2010 I would go with the p-cut it is a very good entry level cutter and welcome to the forum from West Virginia Dan Share this post Link to post Share on other sites
Dakotagrafx 7,297 Posted March 4, 2010 my first cutter was a p-cut - good starter machine to see if you want to put the money into a pro maodel Share this post Link to post Share on other sites
ms_sign 5 Posted March 4, 2010 Welcome from Fort Worth, Texas. Have fun, Jon Share this post Link to post Share on other sites
Sherri Jackson 0 Posted March 4, 2010 Thank you all for your responses to my question. I am going to try the Procut machine. Sherri Share this post Link to post Share on other sites
BannerJohn 1,324 Posted March 4, 2010 Between the 2 I would also recommend the Pcut,and I have both. I would add another pich roller,if USC ever starts listing them again on their website. Share this post Link to post Share on other sites
mabscotthandyman 1,410 Posted March 5, 2010 whitch machine are you going with Sherri Share this post Link to post Share on other sites
Guest kenya Posted March 6, 2010 I agree. The pcut is a great machine for the price. Share this post Link to post Share on other sites
MacGrafix 5 Posted March 7, 2010 Stay away from the laserpoint, if possible. If I could go back, I would have bought a p-cut instead. My LP works, but I wish I had done more research. Share this post Link to post Share on other sites