Kimon 1 Posted February 21, 2010 Tomorrow is a new day. Share this post Link to post Share on other sites
convictedthruChrist 0 Posted February 21, 2010 At this point, I'm gonna have to agree with you. Talk to ya in the morning....I hope Share this post Link to post Share on other sites
convictedthruChrist 0 Posted March 3, 2010 Alright! Got communication with the zen cut green on the mac osx. Originally I bought a usb to serial connector and downloaded the keyspan driver which didn't work. The guys at Us cutter redirected me to the right " KEYSPAN ". No one I could find in California carried the right one, not even Apple Found one through Wal-Mart, online only, of all places. Came with mac osx disk and loaded right up. Used the Jaguar II 61 under cutters in SC pro as recommended By US Cutters changed the device output from gcc usb to dev/cu/usa19H41p1. Cutter seems to reading fine, now to start cutting. Share this post Link to post Share on other sites
BannerJohn 1,324 Posted March 3, 2010 so the problem wasn't the cutter or the software, but the drivers for theMac itself? Glad you got it fixed,and perhaps make a post on how to do it,without the other commentary, and I will sticky it. A link to the adapter at Walmart wouldn't hurt either. Share this post Link to post Share on other sites
Dakotagrafx 7,297 Posted March 4, 2010 Glad to hear you got it working Share this post Link to post Share on other sites