DIRTRACER 2 Posted February 2, 2010 Ihave someone who wants a logo on glass he wants paint,is there a way to do this.Itryed painting don't work.thanks.also can you get transfers to put on glass. Share this post Link to post Share on other sites
bamafan2277 50 Posted February 2, 2010 What type of glass? Like a drinking glass, a glass window? If its a drinking glass you can etch it then use special enamel paint that you put on then bake it to make it perm. Share this post Link to post Share on other sites
DIRTRACER 2 Posted February 2, 2010 graphic is complex ,to much weeding,did not know if someone printed something like that,Sorry it is a beer mug. Share this post Link to post Share on other sites
bamafan2277 50 Posted February 2, 2010 it was probably done in a factory where they used something like screen press where they use a rubber pad filled with air to transfer the ink and then baked the ink on. It would definately be baked into the glass to make it last long enough. Share this post Link to post Share on other sites
DIRTRACER 2 Posted February 2, 2010 ok thanks, I am going to tell him can't do.Thank you for your help. Share this post Link to post Share on other sites
FutureSgtsWife 0 Posted February 4, 2010 You can sublimate a color image onto a glass beer stein.... I haven't done one yet, but I know its available. And then it's dishwasher safe because it's baked right into the coating. Share this post Link to post Share on other sites
sarconastic 29 Posted February 4, 2010 I just cut my image in vinyl. then reverse weed it. I have sand blasted, spray painted and hand painted several designs on Beer mugs, Tumblers and shot glasses this way. Kevin Share this post Link to post Share on other sites
kst8catfan 0 Posted February 4, 2010 Beer mug >> mask it using any old sign vinyl >> laser it >> sandblast it >> peel the masking. Comes out perfect Share this post Link to post Share on other sites
