Rodger 527 Posted August 27, 2010 - I have subscribed this thread for further referance. Regards Hmmm , it is seldom I read 3 posts in a row from members that all have 2 posts & all use " regards " . I also use " regards " Share this post Link to post Share on other sites
BannerJohn 1,324 Posted August 27, 2010 - I have subscribed this thread for further referance. Regards Hmmm , it is seldom I read 3 posts in a row from members that all have 2 posts & all use " regards " . I also use " regards " ]spammers..setting us up for a spam storm. There are at least 3 that I have found so far. Check out their signatures. Share this post Link to post Share on other sites
Rodger 527 Posted August 27, 2010 Hey John , The signature lines cracked me up .. the augumentation stuff made me think of the " bitty " video . I have to thank you because I had never seen that before ... now I'll never forget ! I get many chuckles thinking about that video Share this post Link to post Share on other sites
AshComputers 197 Posted March 2, 2011 Hey BJ, is this still available? Link is wrong, or the product is gone Share this post Link to post Share on other sites
NukleoN 34 Posted March 10, 2011 Thanks for the review. Your post gets 1+ from me. Share this post Link to post Share on other sites
Muffoletto 2 Posted January 25, 2012 Ok so my old Fasnap press is worn out.. was going to cost me $175 to replace the dies so I decided to tryout the Big Mouth Blue Grommet Press. Bought it and a 1000 pk of grometts for $98 bucks. Man! If I knew it performed that well, I would have gotten the Big Mouth Grommet Press in the first place! Thanks UC!, Dave Share this post Link to post Share on other sites
BannerJohn 1,324 Posted February 13, 2012 I have had the frogger for a long time and it still works as new...I did buy a set of the larger dies and love them! Share this post Link to post Share on other sites
kelliann 4 Posted June 23, 2012 I like my Big Blue as well. Lately I have been having issues with my grommets. They are rusting. Has anyone tried grommets by another manufacturer with their Big Blue? I picked up a few from the local hardware store to try them out, but they don't press well. Share this post Link to post Share on other sites
BannerJohn 1,324 Posted June 23, 2012 Even as damp as my shop is, I've never had any to rust. The Frogger and Big Blue presses use specific grommets. I'm not sure that you can get regular grommets anywhere else that will work with them. Share this post Link to post Share on other sites
kelliann 4 Posted June 23, 2012 The ones I got were rusty out of the bag. US Cutter is working on figuring that out, but in the meantime, I have some projects that I need to add grommets to. I just thought I'd see if anyone had used anything else, since I am kind of at a stand still. Share this post Link to post Share on other sites
BannerJohn 1,324 Posted June 23, 2012 Rusty out of the bag, you should have gotten a new bag or a refund. No excuses. Share this post Link to post Share on other sites
kelliann 4 Posted June 23, 2012 Yes they were rusty out of the bag. This was the second bag, the replacement bag. I am not worried about it, US Cutter is on top of the situation. I am very happy with how they are handling it, but in the meantime, I need some grommets that fit into my Big Blue. Share this post Link to post Share on other sites
su-z-q 8 Posted July 15, 2012 Frogger, did they every replace those grommets for you? Share this post Link to post Share on other sites
kelliann 4 Posted July 16, 2012 Not yet. I think I will give them another call. Share this post Link to post Share on other sites
fustratedinhawaii 71 Posted March 25, 2015 Since this thread is a sticky, I wanted to bump it up again. John, all the links that were on here for the grommet press don't work anymore. Can you show us which press you were originally talking about? (Hope you're still here!). Thanks !! I have a lot more questions, but I'll do a few hours of searching 1st before I p off any of the old-timers !!! FH Share this post Link to post Share on other sites
Dakotagrafx 7,297 Posted March 25, 2015 Since this thread is a sticky, I wanted to bump it up again. John, all the links that were on here for the grommet press don't work anymore. Can you show us which press you were originally talking about? (Hope you're still here!).Thanks !! I have a lot more questions, but I'll do a few hours of searching 1st before I p off any of the old-timers !!! FH I think john had linked to the frogger green that usc doesn't have on the site anymore . if you want one I can ship out mine for $18 + actual shipping ( 12x12x10 13lbs priority mail)- they are quite heavy and you will need to order grommets from usc available here http://www.uscutter.com/4-Grommets-for-the-Frogger-Green-Baby-Blue-grommet-press Share this post Link to post Share on other sites
fustratedinhawaii 71 Posted March 25, 2015 Static Cling Window Film? nah...no thanks. Share this post Link to post Share on other sites
Dakotagrafx 7,297 Posted March 25, 2015 ummm - replying to 3 things at once -link corrected Share this post Link to post Share on other sites
fustratedinhawaii 71 Posted March 25, 2015 BAHAHAHAHA !!!!!!!!!!!!!!!!!!!!!! I didn't want to do a smiley...just see what you would say !!! How used is it?? Just checked the USC shipping if I were to ship the Big Mouth here. They say it'll cost me $75 I know a Large Flat Rate box only cost $16 to ship here (or around that). Will it fit in a flat rate box? Share this post Link to post Share on other sites
Dakotagrafx 7,297 Posted March 25, 2015 used it a couple years - I just upgraded to a baby blue - the frogger works great you just have to apply the grommets from the back of the banner as they decided to place the dies in opposite of most presses. I first upgraded to the big mouth press and was pretty disappointed that one of the die sets didn't liine up right even after a couple replacement dies - so went back down to the baby blue mainly to apply grommets to the front of my printed banners. they are cast metal so not much to go wrong with them 2 Share this post Link to post Share on other sites
fustratedinhawaii 71 Posted March 25, 2015 dakotagrafx, thanks a lot, but I think I'll pass. I'll save up for a Baby Blue like you have I DO like the idea of doing the grommets from the front. I've done them in light carpet with a hammer, don't think I'd like doing it "backwards". Appreciate the offer though !!! FH 2 Share this post Link to post Share on other sites
jaybyrd 3,770 Posted March 25, 2015 It's not as bad as it sounds. I've been using a frogger since right after Bannerjohn recommended it and it's still going strong. 4 Share this post Link to post Share on other sites
Dawn's Design 403 Posted March 25, 2015 I've been using my frogger grommet press for over a year now with no problems.. 3 Share this post Link to post Share on other sites
Macon Innovations 228 Posted June 8, 2015 Why has this Member not been banned yet? 65 posts and i'm sure its all spam... Share this post Link to post Share on other sites