tgriffith94 0 Posted January 21, 2010 i recently purchassed a roland colorcamm pc600. it cuts great, but when i try to print it starts beeping and flashing the setup and catridge lights. and when i do get it to print, it won't contour cut. it is set to print and contour so i'm not sure what's goin on. i'm only 19 and don't have a ton of money to take and have it fixed so i was gonna make sure it wasn't something simple. any advice would be greatly appreciated. thanks i would also appreciate a couple of suggestions on good sites to download free vector images. thanks Share this post Link to post Share on other sites
MZ SKEETER 4,709 Posted January 21, 2010 don't know if you have a user manual for the product, but here it is. and you can do a search with most any search engine for free vector images. http://support.rolanddga.com/_layouts/rolandreports/_productsupportsearch.aspx Share this post Link to post Share on other sites
europeancardriver 1 Posted January 23, 2010 Not sure if this is a simple response, but check in the setting the dry time. It could be it is printing and then waiting before your cut. Ty Share this post Link to post Share on other sites
tgriffith94 0 Posted January 24, 2010 thanks ty. that's what it was. send me the bill Share this post Link to post Share on other sites
