MacBook pro with snow Leopard,Copam 4050, keyspan and Signcut set up issues

[kburk 2]

Hey all, So I switch over to a Mac and I'm just finally attempting to run my cutter (Copam 4050) with a Keyspan USA-19HS and Signcut pro. My issue is Signcut Pro  loads all good and is working fine but does not see my cutter. I think or I know the issue is the Mac does not see the cutter and is trying to make the Keyspan a Modem?? I really don't know how to problem solve much in Mac so I'm a bit lost on this one. Any suggestions Thanks Keith

[kburk 2]

So no one out there to help?? :-

Really frustrating when your cutter won't cut

even more when Signcut is off line and the forum

is dead. When is signcut help actually around?

What time zone are they in?

[MZ SKEETER 4,708]

have you read this post for support?  Kimon has had a death in his family lately, 

http://forum.uscutter.com/index.php/topic,20945.0.html

[kburk 2]

Yes thanks I have a ticket open with the sign cut but there is no response from them.

Keith

[kburk 2]

OK just got a Email back from Kimon, unfortunately they can't help because it is hardware. Or...Maybe hardware

He did ad he was going to check with his tec guys . I hope they know.

So right now I've got Signcut Pro a Keyspan adapter and a copam 4050 that don't talk. The keyspan has the newest drivers

but ? anyone like to make a guess?? Some one must have a mac and a cutter that works out there what did you do???

Keith

[kburk 2]

Can any one tell me how to install the keyspan driver so it works with the cutters?

I have Snow Leopard and it put the new keyspan drive in to the modem setup menu.

Sign cut does see it but it wont work. I'm hopping some sone here has a mac with a keyspan and they could just

look at there settings. At least then I would have something to go on.

I still am not able to cut and I really getting frustrated.

Any help would be great.

Keith

[kburk 2]

Cutter is still down I'm going to have to go buy a PC to run signcut pro and my cutter I guess

[kburk 2]

Got the cutter running I have dirty pins in the serial port in between the gender switcher and keyspan.

Holly cow do I have some cutting to do now I was down for 3 weeks!!!

gotta Run!!!

Oh and Kimon was a big help For the record!!!  

Keith