europeancardriver 1 Posted January 5, 2010 Hello, Looking for a machine that can cut Magent material. Trying to make numbers and some contour cut signs. Thanks, Tyler Share this post Link to post Share on other sites
europeancardriver 1 Posted January 5, 2010 Are you telling me the a the standard plotters will cut magent material? Thank you, Tyler Share this post Link to post Share on other sites
Jay2703 704 Posted January 5, 2010 You shouldn't need to cut all the way through. If you just score the top you will be able to pull them apart. Jay Share this post Link to post Share on other sites
john! 1 Posted January 6, 2010 to my knowledge, plotters as well as print/cut machines are not made to cut magnetic material. I know they make digital mag material but your machine honestly will not last as long as if you didn't. A tech once told me that it is very hard on the machines. Share this post Link to post Share on other sites
rjfox 0 Posted January 6, 2010 A while back someone on here was cutting magnets. A quick search didnt come up with anything, but maybe a more in-depth one might. As I recall they were just scoring halfway through and then either tearing or using scissors the rest of the way. Like guest said, it would add a little more stress to your cutter. Share this post Link to post Share on other sites
joshlindt 2 Posted January 6, 2010 i have a seiki cutter and i run my mag thru mine using a 60 deg blade to score it an then just peel the rest Share this post Link to post Share on other sites
BannerJohn 1,324 Posted January 6, 2010 i have a seiki cutter and i run my mag thru mine using a 60 deg blade to score it an then just peel the rest same here...and I also use a refine for the same thing. 2 years with no ill effects. Share this post Link to post Share on other sites