Sign in to follow this  
Yones12

Creation PCUT

Recommended Posts

Hello, I Just bought the Creation Pcut 24inch, im useing flexi pro and when i cut, i see blade marks on the vinyl and when i try to weed alot of the letters and the picture pull up with the vinyl and some off the cuts are not closing all the way....ANY HELP PLEASE!!!!

Share this post


Link to post
Share on other sites

The cuts not closing is definitely the blade offset. Tearing up edges could be a combination of things but is most likely too much pressure.

Share this post


Link to post
Share on other sites
Guest HowardI

Use the test feature to determine if the blade depth is set correctly. 

If it's too shallow you will not be able to weed, if too deep it will cut into/thru the backing. 

Once that's set properly then I'd try a real cut. 

To do the test cut press online, then pause, pause.  It will cut a small rectangle.  You can use this to determine if it is cutting too deep, too shallow, or just right.

Hope this helps

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this