HELP I can only get half my stuff cut ?!@?*!#!*?!

[jstovson 1]

Dont know what the problem is - the machine worked just fine on the old computer, but won't work with vista and a usb connection!!!  I cleaned it off the old computer b4 I made sure it worked on this one. I know not too bright, and can't put it back on because I used up my last 3 transfers trying to figure this out!  Been dealing with this for almost 3 mos, and FINALLY got it to cut in signblazer - but only half of the project!  I can't get it to work at all in sign cut. I have a refine 721 thats about 2.5 yrs old. I don't use it much but it worked great. I've checked and rechecked the numbers on the machine and signblazer - they're all the same, 9600 baud, 8 vale, usb com4.........          Please Help

[mikerob2334 2]

if you're using usb set the baud on cutter and sb to 4800. had the same problem with mine on vista and usb when i first got it, but works fine on 4800

[jstovson 1]

It won't work on 4800 - but I'm wondering if their is a "master size permittiter" somewhere on SB???  If I make it small enough it seems to cut? Or maybe this is just making me crazy..........

[Guest HowardI]

Make sure the flow control is set to hardware.  Both in the software (Signblazer and/or Signcut) and in the windows device manager.

This usually fixes this issue.

Howard Irwin

Support Specialist

US Cutter

425-481-3555

888-298-8143

  - Option 2

[jstovson 1]

Think I've got it working. I hope! Thanks for the help.    Starla