VendettaVinyl 0 Posted September 1, 2009 It is adding lines, that butcher my designs! in the cutting part they show up as dotted lines. Please help! Share this post Link to post Share on other sites
Jay2703 704 Posted September 1, 2009 Is it doing it to all files or one in particular. If it's just one, can you post it? Jay Share this post Link to post Share on other sites
MZ SKEETER 4,708 Posted September 1, 2009 try uninstalling Sign Blazer, and reinstall, and see if that helps, download the version that is on the Us Cutter auctions on EBAY.. people seem to be doing better with that version. Share this post Link to post Share on other sites
VendettaVinyl 0 Posted September 1, 2009 Thats the verison I have, got my Refine from the ebay store. Share this post Link to post Share on other sites
MZ SKEETER 4,708 Posted September 1, 2009 ok, but did you try uninstalling and reinstalling it? and do you have all your weeding lines off also maybe you could post a screen shot of the Sign Blazer layout with a design pulled up ready to cut, so we could see the lines you are referring to. Share this post Link to post Share on other sites
VendettaVinyl 0 Posted September 1, 2009 I will try that later today, I would take a screen shot but its on my PC with no internet on it. Share this post Link to post Share on other sites
MZ SKEETER 4,708 Posted September 1, 2009 you can also use a digital camera, or camera phone to take it. I do that , I just take a picture of my pc screen and upload it. Share this post Link to post Share on other sites
barrypatch 0 Posted September 1, 2009 Are the lines cut the same depth as it cuts the vinyl? Also, do the lines follow the path of the blade? You can compare what is on the screen after you cut the vinyl to the actual vinyl. I had a horrible time with that and ended changing my ground wire to a heavier wire, adjusting the blade and found my blade holder was inserted incorrectly. It fixed all my extra lines. Nancy Share this post Link to post Share on other sites
MZ SKEETER 4,708 Posted September 1, 2009 Are the lines cut the same depth as it cuts the vinyl? Also, do the lines follow the path of the blade? You can compare what is on the screen after you cut the vinyl to the actual vinyl. I had a horrible time with that and ended changing my ground wire to a heavier wire, adjusting the blade and found my blade holder was inserted incorrectly. It fixed all my extra lines. Nancy from their original post, they are stating the lines are in their cutting screen layout prior to cutting,, so they are cutting those lines plus their design,, at least that is the way I read it. Share this post Link to post Share on other sites
VendettaVinyl 0 Posted September 1, 2009 Yes its the software not the cutter. I can get you guys a picture when I get back to my studio, out of town right now. Should be later today Share this post Link to post Share on other sites
CTeeSwaggCo 0 Posted September 10, 2011 im having the same problem! this is stressing me out because i dont see the dotted lines and red lines until after* the cutting ... but lately my cutter has been starting at a different point.. and then just making a line across the whole thing and goes to the end and its still making noise -___- Share this post Link to post Share on other sites