RPM Graphics 6 Posted October 14, 2009 Where can I find the newbie manual? Every time I hit cut the carraige goes all the way to the left and hits the reset and then stops. I have already tried to set a new home spot, but it continues to go to the left. Share this post Link to post Share on other sites
tbirddmnd 1 Posted October 14, 2009 << Where can I find the newbie manual? >> +1, I'm still no further. Share this post Link to post Share on other sites
CRD 9 Posted October 14, 2009 http://forum.uscutter.com/index.php/topic,17489.0.html for the new bie manual. If the head goes to the left when hitting CUT in SBE then first try a small sign like the word HELP in 5 x 5 cm max. If you set metric/inch wrong in SBE and you hit cut it might that is cut a very large sign. Try to start simple and advance from there. Let us know. Paco Share this post Link to post Share on other sites
RPM Graphics 6 Posted October 14, 2009 I forgot to set the overall cut size and now it's fine, just have to remember to hit reset all the time thought. only problem is the L to R cuts are choppy looks like its cutting a dashed line....like this - - - - - - - - - . I have played with pressure, offset and blade depth, but nothing really jumps out. any ideas? Share this post Link to post Share on other sites
CRD 9 Posted October 15, 2009 Read the NB manual for correct blade depth setting first. The start with lowest pressure with machine test cut square and raise the pressure valeu by 10 untill your close. Paco Share this post Link to post Share on other sites