mr300s 1,272 Posted August 4, 2009 I am going to buy a compam. On ebay (Us Cutters) they are $688.57 with a 90 day warranty. On their site they are $759.98 so there is only a difference of $71.47. Guess which one I am buying, for $71.00 and a lot more warranty don't think you can go wrong. Share this post Link to post Share on other sites
Dakotagrafx 7,297 Posted August 4, 2009 you will love the copam! I started with a p-cut then refine now copam . . .does more intricate stuff lots better! Share this post Link to post Share on other sites
Guest kenya Posted August 4, 2009 I'm with you Bill on buying a Copam. I love my pcut..... thankfully no problems here or with the refine I had, but I want a more professional cutter. Something that will cut intricate files like Scott's does. Share this post Link to post Share on other sites
Guest fivestar Posted August 4, 2009 Get a Graphtec! +1........ You won't be disappointed with a GraphTec. Share this post Link to post Share on other sites
Dakotagrafx 7,297 Posted August 4, 2009 oh don't get me wrong - i am sure there is a graphtec in my future somewhere when I can afford it as my next step but for now the copam is worlds above the other 2 Share this post Link to post Share on other sites
BannerJohn 1,324 Posted August 4, 2009 Yeah, it's easy to say 'get a graphtec' not so easy to pay for it,for some of us...or even to justify it if we have the money. I do quite well,cutting more vinyl in a day than most people do in a week...and I have 2 cutters...one cost me just under $1000,and a refine that was I think about $300. And I have never (in 3 years) run across anything I couldn't do with either of them. When I can think of a reason (other than bragging right) to get a graphtec, I will. But I haven't been able to yet. Share this post Link to post Share on other sites
Brandon_Davis 1 Posted August 4, 2009 Mr. 300 ... What adjustment issues are you having...?!? Share this post Link to post Share on other sites
Guest HowardI Posted August 4, 2009 Please do let us help you with your PCut problems. It's easiest if you can call us, it's much more interactive! Either way, do let us help. Howard Irwin Support Specialist US Cutter 425-481-3555 888-298-8143 - Option 2 Share this post Link to post Share on other sites
Guest kenya Posted August 5, 2009 Yeah, it's easy to say 'get a graphtec' not so easy to pay for it,for some of us...or even to justify it if we have the money. I do quite well,cutting more vinyl in a day than most people do in a week...and I have 2 cutters...one cost me just under $1000,and a refine that was I think about $300. And I have never (in 3 years) run across anything I couldn't do with either of them. When I can think of a reason (other than bragging right) to get a graphtec, I will. But I haven't been able to yet. +1.............. absolutely John............. I would love a Graphtec, but right now my budget doesn't allow the purchase of either. I'm learning as much as possible on other cutters to make an informed decision. Right now, I'm putting more money into my supplies and will consider a purchase of a new cutter before the holidays. My pcut & refine have more than paid for themselves, just need more detailed cuts. And the jobs that I've done using them is unbelievable. My husband & I are adding on another room to our house for a shop. This will have it's own entrance & this is a hugh expense, so I need to wait. Share this post Link to post Share on other sites
Cre8tiveCutter 7 Posted August 5, 2009 Your right Banner John, is so much easier to say buy a graphtec cuz I want one so bad too! I have the pcut and while I have not had any major issues thank goodness, I want to be able to do smaller cuts. I did some small graphics for koozie cups and I found it a little difficult to accomplish. I'm going to have to wait awhile on getting one though. The economy sure does suck right now! Share this post Link to post Share on other sites
BannerJohn 1,324 Posted August 5, 2009 what's the deal with smaller cuts? I've cut text Share this post Link to post Share on other sites
sarconastic 29 Posted August 5, 2009 If you've read any of my posts on the Laserpoint, you know I have spent a lot of time tweaking this machine, and I can now cut 3/16" Block (Bold & stretched) lettering without a problem on it. I have to slow the speed down to 20 or so, 60 degree blade too. Weeding is tough but it will do it. One thing I have found is the vinyl makes a big difference. I don't just mean Quality, though that is a factor. I have a roll of pink cast vinyl that I got dirt cheap, the supplier told me it had been on the shelf for almost 2 years. But for a buck a yard I took a chance. It works fine for any large stuff with no sharp details, but you try to cut small it either peals up or doesn't complete cuts. It's a little stiffer than regular cast from being a little old. I have even noticed this on going from 2 different rolls of Oracal 651 but a different color, got both from the same supplier at the same time, but one you can cut fine the other you can't. I guess what i am trying to get across is first, take the time to tune your machinery, you have to do this in any business. I realize not everyone is a mechanic, but you don't have to be to work on these things, they are simple as heck. Just tightening screws and bolts is sometimes a fix in itself. Second, sometimes it's just the materials fault, nothing to do but get new materials. Third, if all else fails, get "Ready to throw the Pcut in the garbage" Kevin Share this post Link to post Share on other sites
procase 0 Posted August 5, 2009 I am a newbie .. so tell me what is a Pcut ? and what is a Compam ? just looking at the cutters .. graphic art background not to checked out on computer graphic and cutters .. where to start is my question .. Been ordering my vinyl from wholesaler and do not have the control I would like .. my customers are not getting my input by working this way .. plus cost plus headache .. can you help . ? thanks Procase Share this post Link to post Share on other sites
midwaste 4 Posted August 5, 2009 Sounds like you have the blade adjusted too far out. It shouldn't even be possible to cut all the way through paper, no matter what the pressure setting. Follow the instructions attached here exactly: http://forum.uscutter.com/index.php/topic,3362.0.html Share this post Link to post Share on other sites
eddieb378 41 Posted August 5, 2009 Mr300 Im just about with you . I have a pcut and I hate it. I have been following this forum for months now. The bigeest problem with the pcut is the cutting of a large decal. When I cut a 5 foot decal and it dont cut about 3 inches of the main part and causes me to throw the whole decal away its getting in pocket. I have been adjusting from the blade depth and pressure and all that and nothing seems to help. When I cut a small decall it dont make good clean cuts it makes me so mad. This is my name on the line and I have checked every adjustment from offset to the tracking but it dont get better. The problem I have Is mine was bought from ebay and the warrenty is gone. I dont know I hate it. Share this post Link to post Share on other sites
eddieb378 41 Posted August 5, 2009 Im telling you I dont make alot of posts on here but I am here every night triing to get my cutter right. I have done everything that I have read on here to make it right and its just not working. I dont know I paid 1000.00 for my pcut laptop and vinyl and now I wish I would have started from scratch.It will not cut consistant.Maybe I should have spent more money and got a nicer cutter.I hate to know that I have t cut a 5" decal and sell to someone. Share this post Link to post Share on other sites
BannerJohn 1,324 Posted August 5, 2009 my brother has a pcut for 2 years and works fine for him. I suggest you call the support number and talk to Brandon or Howard. It is one of 2 things..operator error,or bad cutter. They will help you fix whichever it is. Share this post Link to post Share on other sites
RRE 1 Posted August 6, 2009 Hey MR300s... I was tellin my dad u wanted to throw it in the garbage. First thing he said was we'll pay the shipping if you send it to Omaha. So if you're really throwing it away PM me please. Share this post Link to post Share on other sites
CyberChuck 4 Posted August 6, 2009 I have the PCut 630 and have no issues with it. I have cut decals with Japanese writing as small as 3/4" and wall graphics that were large enough to have to be tiled. I agree with John, contact the tech guys before you give up. Charlie Share this post Link to post Share on other sites
Guest HowardI Posted August 6, 2009 Eddie and Mr300: Why won't you call us for help? We'd love to help you but you have to let us. Howard Irwin Support Specialist US Cutter 425-481-3555 888-298-8143 - Option 2 Share this post Link to post Share on other sites