wickedstangs 42 Posted July 1, 2009 Alright everyone just got home from my vacation and got my Creation PCUT CTN630 vinyl cutter up and running in no time. Man that is a big box Everything was nicely packaged All the software and cables CTN 630 Vinyl Cutter (Ebay Purchase) Hooked it up to my laptop via the USB cable supplied.. Laptop does not have serial output connector.. Hope I have no issues:( Seem to be working ok with the Pen.. Will try to cut something tomorrow. Lots of question coming soon:) Share this post Link to post Share on other sites
Jay2703 704 Posted July 1, 2009 Hey, welcome to the forum. You have a lot more patience than I do. I would have ripped the box open and had the thing put together without ever even thinking of taking pictures. Share this post Link to post Share on other sites
ms_sign 5 Posted July 1, 2009 Welcome from Fort Worth, Texas. Jon Share this post Link to post Share on other sites
99v8miata 3 Posted July 1, 2009 Welcome from Chicago, Dave Share this post Link to post Share on other sites
wickedstangs 42 Posted July 1, 2009 man when they mean 1/4" of a credit card they mean it... My first cut... My Second and Third adjusted the blade cuts good now... Bottom you can still see where its cutting the bottom page and the top is alot better... QUESTION? When you make a mistake how do you stop the machine from cutting? Share this post Link to post Share on other sites
tlzimmerman 11 Posted July 1, 2009 you should be able to take it offline somehow (i hit offline with my refine, there probly should be something similar on the pcut) then I take out the blade and let it run. I have tried to hit reset, and that makes it stop, but then it resends it iwth the next job for some reason, so I just take out the blade holder and media and turn up the speed and let it run til its done. Share this post Link to post Share on other sites
Guest sciondrgn Posted July 1, 2009 I just hit the reset button and that haults the machine Share this post Link to post Share on other sites
arthur712 6 Posted July 1, 2009 Welcome to the forum, I can not wait till I get mine!!!! Share this post Link to post Share on other sites
wickedstangs 42 Posted July 2, 2009 I just hit the reset button and that haults the machine Thanks... Next Question how do you convert a .gif or any other image to get it ready for print? Share this post Link to post Share on other sites
mr300s 1,272 Posted July 2, 2009 QUESTION? When you make a mistake how do you stop the machine from cutting? All I do on my Pcut is hit either red button left or right stopped right away. Then just hit the reset and start over Share this post Link to post Share on other sites
signpro 1 Posted July 2, 2009 Lookn good! Welcome from WI! Share this post Link to post Share on other sites
Guest kenya Posted July 3, 2009 Welcome from Florida. Share this post Link to post Share on other sites