Guest

SignBlazer Elements downloads and other info

Recommended Posts

SignBlazer Elements Installer: http://support.uscut...d=30&nav=0,4,12

SignBlazer Elements Update: http://support.uscut...d=26&nav=0,4,12

**note** Install this update after you run SignBlazer Elements Installer. This update is necessary if you are trying to use the RainDrop Craft Cutter with SignBlazer Elements.

SignBlazer Elements Manual: http://support.uscut...d=31&nav=0,4,12

SignBlazer Elements help file: http://support.uscut...d=39&nav=0,4,12

SignBlazer Elements knowledge base: http://support.uscut...=5&pcid=0&nav=0

If you have anything useful to be added to this post please let me know and I will edit it into the original post.

Links appear to be broken

Share this post


Link to post
Share on other sites

For my PDF on how the get the actual activation code for signblazer US version only follow this link I'm not going to maintain it so if it is down email me and I'll get it to you that way.

Link. http://www.mediafire.com/?xtx3vr9rx22b0i3

  • Like 2

Share this post


Link to post
Share on other sites

Nice Job Mx2......I did this step by step and it worked good. SOOOOOOOOOOO glad to have the pop-up gone. THANK YOU VERY MUCH FOR YOUR TIME IN PUTTING THIS TOGETHER AND SHARING IT WITH US!!!!!!!!

Share this post


Link to post
Share on other sites

No. But you should be able to use the redsail drivers

Share this post


Link to post
Share on other sites

My buddy has a mh721 and it never got pluged in...so 6 days ago i got it to play with.......hahaha...i just typed random leters to see how to do it and when i get the file to SBV there is a blank screen...there says there is a file in eps but NOTHING is there...White page...go back to inkscape and there it is....HELP...My dog is gettin scared!!LOL lot of curssin..

 

im just playin around,,, not a business....so i just have the demo or free version of ink scape...but the program will only run for a certain time THEN,, you guessed it...RUN TIME ERROR..is there a way to get around this...it is useless to me do to the fact 10 mins is not enought time to do much..and it does save anything...useless...

Share this post


Link to post
Share on other sites

 If you mean you are not seeing anything in SignBlazer ( importing from InkScape ) .., it does not reconize newer EPS files . Make what you want in SignBlazer . SCALPro has a free trial . It is a design & cut software also .

Share this post


Link to post
Share on other sites

For anyone that is having troubles with getting their value cutter to work, the following LINK installs the cleanest version of the No-Trial SBE.

http://www.uscuttersupport.com/downloads/Software/SignBlazer/signblazer_setup.exe

 

For  SC, use the LIYu, for LaserPoint II, you can select the Creation PCut CT630 and for the MH MK2, just choose RedSail or Copam CP-2500 during setup.

 

Just wanted to have this link out there, since people keep trying to use older (broken) download pages, or versions that have the nag screens, and this version eliminates all that.

Edited by slice&dice
Link updated
  • Like 3
  • Thanks 1

Share this post


Link to post
Share on other sites

Direct link to installer: http://download.uscutter.com/SBEforUSCutterSetup.exe

This is the USCutter Edition (contains drivers for their cutters).

Better Yet, here is the directory http://www.uscuttersupport.com/downloads/Software/SignBlazer/

Also contains their manual.

  • Like 2

Share this post


Link to post
Share on other sites

I need help, I cant get the drivers to work. in the device manger section, other devices, it says that no drivers were found. Is there a place I can go to download the driver? I had it working before and know it stopped. HELP!!!

Share this post


Link to post
Share on other sites
9 minutes ago, iro5812 said:

I need help, I cant get the drivers to work. in the device manger section, other devices, it says that no drivers were found. Is there a place I can go to download the driver? I had it working before and know it stopped. HELP!!!

any chance you downloaded the usb chipset driver for whatever cutter you have before you tired connecting to the cutting software?

besides the above question - what cutter do you have?

Share this post


Link to post
Share on other sites

slice... my norton is blocking the download.  I am able to download the file then norton removes it quickly due to high trojan threat risk.

image.png.ab8d1e37699e63b7902e52c070ede176.png

Share this post


Link to post
Share on other sites

Anti-virus's have flagged SB as a threat for years. It's not, the file is safe. Just disable Norton to download the file.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now