Hector 1 Posted May 24, 2009 Hey friend, very usefull this tip. Thanks, but would like to know if this refill could be made with the SBE. Thanks Share this post Link to post Share on other sites
finagin 0 Posted May 25, 2009 i tried this for the first time, sharpie on vinyl, it worked great. thanks. what modifications do we need to do to the rollers of US Refine MH721? Share this post Link to post Share on other sites
finagin 0 Posted May 26, 2009 ok, i tried something new, i took some Cricut sticky plastic (i use it to cut hard stock paper for my wifes scrapbooking) i have a sheet that is 14"x14" i stuck a piece of coroplast on it and set the tension wheels on my US Cutter mh721 to run on the edges of the plastic, then i stuck a 12"x12 piece of coroplast to it and printed a nice sign, with no modifications. you can get these Cricut sheets up to 24"x24" so you could do some nice fast signs with a Sharpie thanks again!!!!! Share this post Link to post Share on other sites
Beardown 0 Posted May 30, 2009 Hey Tater Tot First off good to see you around after a year or so old friend !!! Hey quick question! what is the Pen width and angle that you are using for these??? Good to see you around brother !! Down Share this post Link to post Share on other sites
cpwall 0 Posted July 27, 2009 I know this post is kinda old but does anybody know if SB has a fill plot option? I love this idea Share this post Link to post Share on other sites
wdcisco 0 Posted July 27, 2009 You guys think it would be possible to cut PVC material w/ the right attachment? OH hoooo yeah. Share this post Link to post Share on other sites
TaterNuts 3 Posted July 28, 2009 My next project is to convert it to an engraver... LOL... Share this post Link to post Share on other sites
Popeye 0 Posted July 31, 2009 I would also like to know if there's anyway to do this in SB.. When you get started on the engraver let me know.. I had limited success converting mine. Problem I had is finding a motor small enough with enough power to do the cutting. Share this post Link to post Share on other sites
TaterNuts 3 Posted July 31, 2009 the only way i could think that you could do it in SB is to maybe make a bunch of 'inlines' close to one another? Share this post Link to post Share on other sites
Popeye 0 Posted July 31, 2009 Hoping there's a simpler way Share this post Link to post Share on other sites
sheepdog 0 Posted July 31, 2009 Tater If you're wanting to engrave go to e-bay and look at #360153716076 which is a diamond engraving kit. $69.00 It has a diamond engraving pen, carrier plate and software. It's the same one that came with my origional cutter but I never used it. Maybe I'll see if I can locate it and give it a try. Hope this gets you headed in the right way. Share this post Link to post Share on other sites
sheepdog 0 Posted July 31, 2009 Also if you go on the SignMax.us forum (you won't stay long) they have a how-to video on engraving. Share this post Link to post Share on other sites