SIGNMAN 0 Posted May 4, 2009 hi im looking to buy a new plotter , heres the link ive been looking at can anyone give any good or bad points ifyou have used one http://shop.ebay.co.uk/items/__PLOTTER_W0QQLHQ5fPrefLocZ1QQ_flnZ1QQ_trksidZp3286Q2ec0Q2em283 thanks Share this post Link to post Share on other sites
SIGNMAN 0 Posted May 4, 2009 sorry wrong link http://cgi.ebay.co.uk/FOISON-HI-QUALITY-C24USB-VINYL-SIGN-CUTTER-PLOTTER_W0QQitemZ120412565900QQcmdZViewItemQQptZLH_DefaultDomain_3?hash=item120412565900&_trksid=p3286.c0.m14&_trkparms=72%3A1683%7C66%3A2%7C65%3A12%7C39%3A1%7C240%3A1318%7C301%3A1%7C293%3A1%7C294%3A50 Share this post Link to post Share on other sites
kenimes 42 Posted May 4, 2009 Similar to the PCut's we sell- decent units for the money. Share this post Link to post Share on other sites
SIGNMAN 0 Posted May 4, 2009 at the min ive got a graphtec its similar to the mh871 but ive been having problems for months with the cuts not closing most the time especially on the circular shapes , so hopefully this would have a lot better tracking Share this post Link to post Share on other sites
ms_sign 5 Posted May 4, 2009 What model Graphtec do you have? Sounds like a offset issue Share this post Link to post Share on other sites
SIGNMAN 0 Posted May 4, 2009 hi this is the one i have but the 34" i think its a CE1000-60 http://cgi.ebay.co.uk/53-SIGN-MAKING-VINYL-CUTTER-PLOTTER-1350MM-FLEXI-SIGN_W0QQitemZ150332295379QQcmdZViewItemQQptZLH_DefaultDomain_3?hash=item150332295379&_trksid=p3911.c0.m14&_trkparms=66%3A2%7C65%3A13%7C39%3A1%7C240%3A1318%7C301%3A0%7C293%3A1%7C294%3A50 ive tried everything - adjusting pinch holders , the belt , new blades , tried every setting i can think of on the pc and the cutter itself , also tried flexi , artcut and signblazer but cant seem to fix it Share this post Link to post Share on other sites
JoeBlow 5 Posted May 4, 2009 I would definitely have the offset checked on the Graphtec, they are one of the top brands, and should cut a lot better than the cheaper brand. Share this post Link to post Share on other sites
SIGNMAN 0 Posted May 4, 2009 ill have another mess about , this is my first cutter which ive had for about 9 months now so im still kinda learning thanks for your info Share this post Link to post Share on other sites
ms_sign 5 Posted May 4, 2009 hi this is the one i have but the 34" i think its a CE1000-60 http://cgi.ebay.co.uk/53-SIGN-MAKING-VINYL-CUTTER-PLOTTER-1350MM-FLEXI-SIGN_W0QQitemZ150332295379QQcmdZViewItemQQptZLH_DefaultDomain_3?hash=item150332295379&_trksid=p3911.c0.m14&_trkparms=66%3A2%7C65%3A13%7C39%3A1%7C240%3A1318%7C301%3A0%7C293%3A1%7C294%3A50 ive tried everything - adjusting pinch holders , the belt , new blades , tried every setting i can think of on the pc and the cutter itself , also tried flexi , artcut and signblazer but cant seem to fix it This does not look like any GraphTec that I have ever seen. If this is your cutter then I dod not think you have a GraphTec. Share this post Link to post Share on other sites
SIGNMAN 0 Posted May 5, 2009 i didnt think it was , it has no brand name on it at all, when i brought it, the person i brought it off said to use GRAPHTEC CE1000-60 as plotter model when setting up flexi. Share this post Link to post Share on other sites
SIGNMAN 0 Posted May 5, 2009 anyone had any experience with euther these 2 , im still trying to decide on which to purchase, http://cgi.ebay.co.uk/EU-REFINE-MH721-MM-VINYL-CUTTER-PLOTTER-DE-DECOUPE-NEW_W0QQitemZ270385016804QQcmdZViewItemQQptZLH_DefaultDomain_3?hash=item270385016804&_trksid=p3911.c0.m14&_trkparms=72%3A1683%7C66%3A2%7C65%3A12%7C39%3A1%7C240%3A1318%7C301%3A1%7C293%3A1%7C294%3A50 http://cgi.ebay.co.uk/laser-point-pcut-ct630-vinyl-cutter-plotter-1year-waran_W0QQitemZ270384778098QQcmdZViewItemQQptZLH_DefaultDomain_3?hash=item270384778098&_trksid=p3911.c0.m14&_trkparms=72%3A1683%7C66%3A2%7C65%3A12%7C39%3A1%7C240%3A1318%7C301%3A1%7C293%3A1%7C294%3A50 Share this post Link to post Share on other sites