My Signcut wont switch from 0deg to 90deg help

[gotkdns 0]

My Signcut wont switch from 0deg to 90deg help and I am wasting a lot of material.  how do I switch it and make it work?  I changed it in settings but it did not cut sign correctly....  Help

[wg_kjell 0]

Hello,

Please setup SignCut-X2 to use rotation of 90-degrees in the Cutter-dialogue.

Then when importing image, click the Tab-key on the keyboard to quickly rotate your artwork to save vinyl.

You can also click Shift+Tab to always rotate the selected colour(s) or image to minimize vinyl usage.

Please see our online manual for more help:

http://www.sc-x2.com/online_manual.html

Also click on the "Cut by colour" under the tutorials to read more about the rotation.

Here are some useful shortcuts:

[tt]These shortcuts are very handy, especially the rotation and mirroring which is

easy to remember.

Main-tools toolbar (Left toolbar): q,w,e,r,t,y,u

Sub-tools toolbar (Lower toolbar): z,x,c,v,b,n,m,,,.,-

Rotate 90 degrees: Tab

Rotate for minimal vinyl usage: Shift+Tab

Mirror image: Ctrl+Tab

Open new image: Ctrl+O

Import latest image under the import-folder: 1

Choose specific file under the import-folder: Shift+1

Read vinyl-size (for supported plotters): 2

Calculate automatic tiles + automatic weedlines 3

Cut out (opens the cut out dialogue): 4

Preview 1 copy: Shift+4

Open the image-dialogue: 7

Open the measuring frame dialogue: 8>

Open the tiles-dialogue: 9

Open the cutter-dialogue: 0

Open the Settings-dialogue: F11

Delete all weedinglines: F6

Delete all registrationmarks: F7

Toggle whole / adapted area: F8

Toggle wireframe / fill viewmode: F9

Toggle tiles, registrationmarks & weeding tools:Space

Toggle measuring, rotation & object tools: Shift+Space

Toggle between the available colours: Ctrl+Space

The most commonly used shortcuts is the Tab-key in various use

with Shift and Ctrl in order to rotate or mirror the active image/colour layer.

Also the 1,2,3,4 buttons are popular for simple signs, like when cutting

a simple text or one-colour signs. As easy as 1-2-3-4 [/tt]

[gotkdns 0]

OK I got it turned to cut but the weed lines dissapear... WHY

[kenimes 42]

For rotating the image or lettering you want to cut, I would just use the rotate tools in SignCut, and not the 0deg/ 90deg

and this way the weed frame never disappears.