Search the Community
Showing results for tags 'undercut'.
Found 1 result
jphphotography posted a topic in SignBlazerHi everyone, I'm new to the forum and have been spending a lot of time reading through before posting this question. Every post I've come across regarding unfinished cuts comes down to SB not having an overcut option, people always suggest increasing offset and the original poster comes back saying that doesn't work (and I agree because it didn't work for me either). Now what I'm wondering is whether there is anyone out there using a PCut 630 with SB that is NOT experiencing this undercut issue? So far the evidence suggests no, however when everything is working correctly people don't tend to post to forums. To clarify what I mean by undercut, basically shapes are not always closed, the end point is always 0.5mm+1mm short of the starting point on a circle for instance. On large objects this isn't as big of a deal but when shapes get down to under an inch this can make weeding a real pain. None of the posts I was able to find seemed to be solved, the suggests/solutions were to switch to different software or to buy a non-value cutter. I'd just like to know if anyone has actually made this work, if so I'll know my struggle is worth it Extra info: Cutter PCut 630 USB model (not sure if CR or CT) Software SignBlazer in trial mode (have only ever used this software so I've always experienced this issue) Tried adjusting offset from 0.0 to 1.0 in 0.1 steps, gap remains unaffected while corners begin to overshoot. No play in blade holder and pinch rollers don't appear to be slipping, also blade rotates freely in holder. Can't afford expensive software, trying to get inkscape working but so far unsuccessful.