Search the Community
Showing results for tags 'foison'.
Found 2 results
-
Hi all I've got signblazer running and cutting with my Foison C24 . I'm disappointed with the accuracy overall. I've played around with the cut offset but it doesn't really get much better. It may have improved with the pen at 0 offset but the pen tip is fatter so I might just look more accurate. I couldn't see my cutter from the list, from memory I used the creation 630. I wondering if this is the cause because my cutter is a 610mm. Lettering under 12mm is almost pointless to try, looks awful. Does anyone have any suggestions for improving the accuracy or is it the best this cutter can do.? I'm not sure if is hardware or software at fault yet, I've seen other versions of SB do they have a Foison C24 listed? Cheers in advance
-
Hi, I haven't used my Foison C24 cutter for a few years and have just setup a PC running Windows 7, installed Sign Blazer 6.06 (Came with cutter) and the USB drivers for the cutter. Powered up the cutter and PC, yet i can't seem to get them to talk to one another. Any ideas? 1. The cutter goes through the motions if i hold the test button down (makes all the right noises and moves etc). 2. Sign Blazer starts fine, in the cutter options it finds the driver for Foison C24, it also shows COM4: USB Cutter (or similar on the USB connection and changes if i put it in another port) 3. Hitting "cut tile" brings up the usual screen and time to complete bar as if it has talked to the cutter (If i switch the machine offline before this, then it waits - so i'm thinking it is somehow talking to it to know that it's offline) 4. Cutter sits there like a lemon.... Could Windows 7 be the problem? Have i missed a critical setting somewhere in the Cutter Setup dialog box? Any help would be much appreciated Thanks Jim
- 1 reply
-
- signblazer
- foison
-
(and 2 more)
Tagged with: