Search the Community
Showing results for tags 'fc7000'.
Found 4 results
Hi all, looked through the forum, saw some older posts about this, but would like to hit this topic again, as hopefully new solutions. I am looking into trying to Print with my inkjet printer, and then laminate it, and then cut it in my Graphtec FC7000-100. SO questions are.... 1. What program could I use, that hopefully you have experience with using (can be paid program obviously, does not have to be freeware) 2. what materials would you recommend? 3. The overall process you do, and how well does it work? thanks in advance! -Russ
I hope this finds any helpful member as I am stuck with a brick of a plotter. So, I went to update the firmware for Graphtec FC7000-130 (USB) to v2.10 (from Graphtec website) to get the perf option. Downloaded all the updates on that page (Windows 7, 64 bit) and thought I followed the instructions well, it started loading, but now it gives me 3 different errors: 1. Straight power up - [bOOT START ERROR] or 2. Power Up, holding Left & Right, goes to Update / Yes then shows [CHECK SUM ERROR] or 3. Power Up, holding Left & Right, goes to Update / Yes then shows [PLEASE SEND PRGM] - I hit PRINT from the Data File Output Utility and [Cannot Access Output Destination] Pops up. What Gives? What should I do next? I attached a screen shot of all the relevant info I could fit. Please feel free to contact me by whatever means are most convenient to you. My contact info is below. Thanks for your help! Alex Wojciecowski Socha Visual Inc. firstname.lastname@example.org (415) 508-5927
I have a graphtec FC7000 and it does not want to turn on. i flip the switch but nothing happens but a clicking noise from the side where the switch is. does anyone know what might be the problem and if it can be fixed. sometimes we get power outages quite often actually, could this be the reason why the machine doesnt want to turn on?? Please help i have a huge project nextweek.