Search the Community
Showing results for tags 'cutting problems'.
Found 3 results
I recently (within the last 6 months) acquired a friend's small cutting business as he was changing careers and would no longer have time to fill orders. I have figured out the odds and ins of the actual plotter and even the software I initially started with (VinylMasterCut v4) and have started figuring out my more recent purchase of Sir Cuts a Lot (bought only due to the fact that a lot of his previous files were used with this program and my upgraded cutter came with VMCv4). One problem I still have is when I compare his decals (red decal picture) to mine (purple decal picture), I see that my letters are not as neatly cut as his and there are even times when the letters are uneven (the letter T for example, the two side of the top line will not be the same width). Also, his decal in the picture was smaller than mine and had better quality cut. Any suggestions or recommendations on how to fix this issue? Thanks in advance for any advice
Hi every one, my cutter was working great but now it's not. and i don´t not what is the problem. when i press the test key or if i send a work to the cutter, it become crazy. PD: sorry for my bad english, Here the video!
If I cut a couple objects out, as the cutter is going the vinyl rides off to the left of the cutter as your looking at it. I have tried tightening it up, tried raising the vinyl so theres no pressure pulling on it, and I have no clue on how to fix this. It cuts the first couple objects fine, then the cuts get thinner and thinner as it goes on. Any ideas???