RCMelton82

Members
  • Content Count

    15
  • Joined

  • Last visited

Everything posted by RCMelton82

  1. RCMelton82

    HP Latex 110

    Hey guys...so next question...HP Latex 110. Definitely an affordable option. HOW good is it? What are its limitations? I've tried to do some research on it but there doesnt seem to be much out there yet, a few assembly videos on youtube but that's about it...
  2. Who here has actually used Flexi and a Titan 3 together? I'm being told by some people they will work fine, just take it slow. Others are telling me the contour cutting is limited to 29x29 and Flexi cloud. I usually import motocross graphic files from Adobe and then contour cut them. Trying to find out if this will work or what I will need. Thanks
  3. Yea. Ill think i'll be safe and just keep saving for Graphtec. lol
  4. Hey guys I'm looking for a cutter. I need it to be at least 54 inch, work with FlexiPro, and have a cut pressure of at least 700g. I was thinking the Titan 3 would be my cheapest option, but I've heard mixed reviews about whether it can work well with Flex or not. Any ideas? Thanks in advance!
  5. Hey guys So I have had access to a Mutoh 1614 and Graphtec FC-8000 cutter for the last year. I learned how to use this equipment the hard way, messing a lot of stuff up and pulling my hair out in the process. However, I lost access to this equipment because a partner was going through a divorce and sold out. ANYWAY I'm now looking to get my own stuff...my focus is on the motocross industry, but I want the ability to do most other things as well. I talked to Paramount about financing equipment from US Cutter and they are trying to take me GOOD on the finance charges. Located a Designjet Z6100 for super cheap in "good working condition" with a parts printer to go with it. I dont know anything about these...Will FlexiPro run them? Anything to be leary of? Another option i've located is a HP 8000s...any ideas? I appreciate all input and advice, thanks guys!
  6. RCMelton82

    HP DesignJet Z6100 ? Should I jump in, HELP?!?!?!

    After doing a little researchm I'm seeing that much of the material is SUPER EXPENSIVE!
  7. RCMelton82

    HP DesignJet Z6100 ? Should I jump in, HELP?!?!?!

    So if i DID jump on this Designjet Z6100, I'm trying to think of what I would be able to print... posters? Promotional indoor stickers?
  8. Hmmm. never thought of that. Never even noticed where I could set an option for that. Are you just hittin cut twice? lol Wonder how much downforce I could get by with then.
  9. on the 54 inch cutter, I am hoping to get a 54 inch printer, and it seems like a waste to have a cutter that cant accomodate it. as for the down force...thicker motocross graphics and lam. Ive been operating a Mutoh 1614 and Graphtec FC8600 64 inch...the Graphtec would only cut the motocross graphics on full force setting of 42, and it maxes at 600g downforce...
  10. RCMelton82

    HP DesignJet Z6100 ? Should I jump in, HELP?!?!?!

    That's super sad!
  11. RCMelton82

    HP DesignJet Z6100 ? Should I jump in, HELP?!?!?!

    Awesome. Probably definitely not a great banner printer then lol! Thanks for the info.
  12. I have not called, but I have send a support ticket in asking.
  13. Hey guys I've seen mixed things and I'm trying to verify if the Titan 3 will run off Flexi or not...Thanks!
  14. RCMelton82

    Titan 3 Laser Offset and Suction Hold Down?

    So you have got your Titan 3 to correctly work with Flexi?
  15. RCMelton82

    HP DesignJet Z6100 ? Should I jump in, HELP?!?!?!

    Thanks friend! Does the water based ink work okay as long as its laminated? or