• Content Count

  • Joined

  • Last visited

  • Days Won


Everything posted by bigfrank

  1. How long in length can I expect my SC34 to cut straight lines without wandering? Thanks!
  2. bigfrank

    Font collections

    Anyone familiar with this font collection? Seems awful cheep in price considering when I go to some sights, they want more than the cost of this collection for one font. Thanks all. Frank
  3. I have gotten permission from large companies to use their videos in my classroom (I teach firearms classes) presentations. But never tried for logos, motos, etc.
  4. thanks. I hade found that, and used the trim button and it worked fine!
  5. I have searched here and on Youtube, but can't find a good toutorial on how to do "knockout" in Vinylmaster LTR What I need to do is to have some text, and a border around the text that is seperate, but no layered. So the text would need to be cut out and just the border sould be seperate, if that makes sense. It would be the same this if I have a square background of one color, and text of another color and the text cutout of the square so it wouldnt be layered. I need to bea able to not layer the vinyl so it is not so thick. Thanks. Frank
  6. US Cutter tells me to use HT55 on Orocal 631. It's a high tack transfer tape, but I'm wondering if it will be too high a tack and pull the graphic off the wall. Waht are you guys using. I need to order some here soon. I see one of the Rtapes says its made for wall graphics, but they are out of the 14" which i wanted. Thanks all. Frank
  7. bigfrank


    I have never used 631, except for paint stencils, and those were small. And since paint stencils are reverse weeded, I didn't have any problems with regular transfer paper on it.
  8. bigfrank


    Thanks all. Going to order some tonight!
  9. bigfrank


    Thanks for the info. Would it be too sticky for Oacal 631 on smaller cut decals to go on glass? If so, what would you recommend for 651?
  10. I would like to start collecting fonts and graphics/clip art as I need it for vinyl cutting. I'm sure there are plenty of places out there to buy the stuff. Can you guys tell me where is your favorite places on the net to buy from? Probably would want to find collections, like on CD, but certain sites for single items would be good also. Thanks all...
  11. bigfrank

    LED lights on cutter

    Not that read through this whole thread ( I got in early) I would have done a couple of thing differently. I didn't get a remote, which in my case would be great for on/off. I may go back and find another strip of lights with a remote and possibly some stronger adhesive. The lights were cheap enough and it really works great. Thanks Primal!
  12. bigfrank

    LED lights on cutter

    Yeah, not sure that will be necessary for the cutter. Double sided tape should work just fine.
  13. bigfrank

    LED lights on cutter

    I have been using mine and they work good. Only problem I am having is that the sticky film on the back isn't sticky enough and keeps dropping down off the cutter. I guess I can get some sticky two sided tape and try that.
  14. bigfrank

    SC. long straight cuts

    I am running VM Ltd and don't remember seeing the option you speak of. Maybe not possible with Vinyl master?
  15. What a great tip! Thanks so much for posting this. It will save tons of vinyl in the long run, and is much easier then then the way I was doing it.
  16. bigfrank

    Blasted Glass

    Very nice!
  17. bigfrank


    I guess it depends on the quality you want. I''m still a hobyist at it. I have more in good spray guns than you have in your whole setup.
  18. bigfrank

    SC. long straight cuts

    Thanks for the info. I wondered if I could cut stripes long enough for the length of a car.
  19. How are you only getting two registration marks in the design page? It always places 4 of them there. Also, I would like to change my stars to squares or rectangles. Is there a wat to do this?
  20. bigfrank


    I do hydrographics. Its a giant learning curve, and very expensive to even get into. Basically, to get into a business the right way, its about 30-40 thousand dollars, and tons to learn. Just the training runs about $2000 most places. Its a very cool process though.
  21. bigfrank

    Looking for Kryptek

    That is actually hex camp. Kryptek camo is a trademarked camo pattern that has hex camo in it, as well as other items. Here is a tumbler in Kryptek Highlander (one of the Kryptek patterns) done with the hydro graphic process. You should be able to get hex camp patterns on Google images.
  22. bigfrank

    LED lights on cutter

    Ordered my stuff after talking to Primal Decals in the last thread. The parts should be here this weekend!
  23. Nice. I'll go and get some. Like you, it's hard to see what is going on when cutting. This will be nice! Thanks again! Frank
  24. Not to hijace, but the lights are awesome, and something I can really use on my SC cutter. What did you use to do this? Do you have a pic of the lights themselves when installed?
  25. bigfrank

    Knockout, or cutout in VM LTR

    Thank you. I'll go back and watch it again