Modtour4
Members-
Content Count
46 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Everything posted by Modtour4
-
Hope someone can help me out. Looking for this font. Hope this works. Thanks Santas Workshop.eps
-
That's odd, I used find my font and couldn't turn up anything. I also tried to smooth it out in CorelDraw and still could not find anything. That's why I come here, you guys are the best! Thanks again
-
Thanks Found it at Fonts Free Russ
-
Well, thank you for the clarification. That's all Mark-S had to say. I said I hoped it worked, if not, kindly explain (like you did) what I did wrong. Thank you for the link to the font. So, next time do I just add a JPG of what I may need? Thanks
-
6 Different what? Type of fonts? Not sure what you mean?
-
Diskus BQ Regular
-
I've used find my font but can't find this font, anyone have an idea? Renovations.pdf Thanks Russ
-
Found it Minister Std Blk
-
You guys are the best!!!!! Thank you so much!
-
I need this to be vectored from png to eps. Can anyone help me out? My niece works for them and they have asked if I could do something for them but I can't get it to come out in a usable form. Thanks in advance. Russ
-
I understand the legs on the N & A are stretched but any help on the font itself would be great! Thanks in advance. Russ
-
David, Thanks so much for your reply. I told her pretty much what you said...I can get you close but it won't be perfect. She tried to get in touch with the original designer but hasn't heard back. I agree that the shadow should go and reduce to a few colors. I also know that the fonts are a mix of a couple of different fonts. I'll continue to work on it. Thanks again for your help. Russ
-
I used Find My Font and it showed this: Regulator (Regulator *Oblique) / [Nick-Curtis / (Commercial)]. When I click on it, i"m redirected to the Find my Font page that shows the font information. When I click on Publisher, it takes me to Nick's Fonts but there is really nothing there. When I click on Buy From, it takes me to another page but the font doesn't show up. I really need this font to finish a project. Can anyone help me out in finding this font. Thanks Russ
-
Trying to figure out how to add the black hard shadow like on this; Any ideas? Russ CT.eps
-
Had to print something 42" long. Have a roll loaded. Pushed button for roll, Would not print all of the graphic, stopped after about 36" How do I set it to print something as long as I need? Thanks for any help. Russ
-
Sorry, didn't mean "print", should have said "cut".
-
Yea, I did. Down to like 5cm! It was more too much blade, need to adjust offset, then try again. Russ
-
I have been asked to do a small sign for an upcoming wedding. I am using Oracal 651, Roland 24GX, 60 degree cutter, slowed the cutting speed down to about 5mm and I'm still getting letter lift off. Anyone have any ideas of what I might be doing wrong? Thanks Russ
-
Now I know how to do it! I did change from a 45 to a 60 degree blade. Didn't know about changing the offset. Thanks eveyone! Russ