robspace3501

<blockquote class='ipsBlockquote'data-author="Mz SKEETER" data-cid="392010" data-time="1429823540"><p> That is the cheapest. Printer/cutter..<br /> <br /> People use the printers from Cobra Ink and contour cut their decals with their own cutter.<br /> <br /> <a href='https://www.cobraink.com/'>https://www.cobraink.com/</a></p></blockquote>

That's the ones but those prices! Lol! I just want oneto see if they get me anywhere haha!! $8500 is a steep hill to climb down.

Thanks again everyone! Everyone is such an amazing help here, I don't know what I would do without you all.

I have been keeping it at a lower speed and figured out the offset and it has been running fine. Made this plate for a test run to see what all the machine and I was capable of lol!

But something affordable rather than the ones we find for thousands.

Yeah, that does this lol!! My phone wouldn't upload the file forsome reason and created the topic anyways...

That prints and cuts? Something inexpensive? Smaller sized for a desktop? I know everyone will have more info than I have found so far.

I brought my speed down to 400 which is pretty slow, the offset to .28 and its running very smooth but I am afraid to bring the speed up anymore because it seems to get a bit messy. I only needed 10 of these and have like 30 lmao! This customer is going to get some freebies! Seems they are pretty precise at the moment. Thank you all again, you are all amazing!

<blockquote class='ipsBlockquote'data-author="Mz SKEETER" data-cid="391730" data-time="1429561787"><p> Have you checked your blade tip to make sure it has not broken off.? Or try another new blade.</p></blockquote> Yeah, the blade is great. I got it looking better! Went to .25 offset but then when I went lower, it looked like the last ones lmao!

Awesome! Thanks Jaybird.

Just put a new one in before the that last test cut. :/

Switched the blade while cleaning, for the fun of it. It's a new blade and looks great.

Do, I do that on the machine or the program? I am not seeing anything on the LCD screen for offset. :/

Okay, so I cleaned the blade and holder, setup the depth again (By the way, I have seen your post on it a ton on here haha!! Nicely done) and did a test run and the corners are still not scuared so, I am thinking it's the offset which if I set it up on the program, I don't think it will affect the test run? Here is the last test run...

The machine doesn't have a setting for it. When I do a test cut without the laptop being connected, it has the same issue. I am going to try connecting it andmessing with the blade offset.