younameitvc
Members-
Content Count
33 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Everything posted by younameitvc
-
TRACE SCREEN DISSAPEARING BEORE I CAN CHANGE SETTINGS
younameitvc posted a topic in VinylMaster CUT, LTR, PRO & DSR
Using vinyl master cut i go to trace my vector. It starts to trace the vector and the trace window pops up. However it traces it super fast and automatically closes the window without allowing me to change settings or click accept. Giving me some funny contour cut outlines I don't like. Any thoughts? -
When printing my logo or image for contour using Epson WF7610 it is also printing very vague parts of the dotted contour cut line in blue. It is not the entire dotted line but here and there around the image. When I perform my contour cut my offset is pretty spot on but this line bleeds into my image a tad. How do I tell it to not print that line?
-
Vinyl Master Cut Contour Cutting
younameitvc replied to younameitvc's topic in VinylMaster CUT, LTR, PRO & DSR
-
Vinyl Master Cut Contour Cutting
younameitvc replied to younameitvc's topic in VinylMaster CUT, LTR, PRO & DSR
I select the image and hit Trace. ( Images detected do you wish to include their auto traced contours ). I click yes and it traces. I then select Output Options ( Use a Contour Cut ). I click accept and then select all and go to Contour Cut Wizard. Select my print options and registration options etc. Then I print. It then prints the image and vary vague spots of the blue contour cut line around the image very close to where the cut is. -
I am using GreenStar by USCUTTER as my vinyl of choice. I recently started selling items that I needed to roll into tubes. I have been getting a lot of bad feedbacks because the decals are being unraveled and have tons of air pockets and wrinkles. I am using R-Tape as my mask. When the decal is rolled the mask is perfectly flat, no wrinkles, no bubbles. It seems like the mask is not adhering to the backing paper so when rolled it lifts and then becomes wrinkled and air pocketed. My customers are not experts on vinyl and are just ruining their decal upon receiving because they try and squeegee them out. It never did this before and I have been using the GreenStar vinyl for awhile. HELP? Tricks, Tips? Best way to inform customers this is normal? Or is it not normal?
-
On top of when researching before I started selling these out of my shop. There is atleast 5 companies in the USA named Duramax
-
I was unaware. I thought the only thing they can copyright is their logo.
-
how much to ship something like that. whats the average weight in ounces.
-
I was'nt going to waste 48" to roll up and show since it would get ruined. Figured I roll something I wouldnt mind getting ruined
-
No not selling that. Just cut that and masked it to roll as an example. The ones I'm selling that im rolling up and having problems with are custom ram bed stripes 11x48 and custom duramax/dirtymax windshield banners that are 5x44
-
Here is an image of one I just rolled up and left overnight to show you what it does. Now I just started using these 2" tubes. Before I was using other methods and never really got a complaint unless the USPS was careless and bent it. I before was just folding them around cardboard and putting into a 12.5x19 bubble mailer and stamping do not bend on it. Never really had issues. I thought these would be more sturdy and less likely to damage. So Im guessing rolling too tight is just a no no.
-
Yes. Decal showing. Im waiting on one of my ebay buyers to send me the pic of the decal.
-
not super tight. First complaint the decal was 12"H x 30"w. Other is Ram Bed Stripes 11"W x 48"W . Shipping in 2"x24" kraft tubes.
-
Does anyone know if my vinyl express Q42 will be compatible with SCALproV4. I have checked craftedge.com but it does not list the models it supplies just the make. I have contacted their customer support and heard nothing. Can anyone just jump on there software and check the cutter menu.
-
Thanks for the info. Right now I am still running sure cuts a lot because of all the orders I still have coming in until I get fired up on something better and obviously learning the new software. TintTek gave me a software V10 with the cutter but it seems like garbage.
-
Thanks. Another quick question. Can I still use my projects from SCAL3 with SCAL4? Stupid question but ya never know.
-
Problems with cursive and cutting into next letter.
younameitvc posted a topic in Sure Cuts A Lot Pro
I am working with SCAL Pro and whenever I am doing projects involving cursive it cuts into the next letter. This creates problems simply because it looks tacky when applying on a car or even home decor. Not only that but making in memory decals when you weed the small letters it will sometimes take out that piece cut into the next letter. Anyone know a setting to fix this or what to do? I just want a nice solid flow from letter to letter. Photo example attached. -
Problems with cursive and cutting into next letter.
younameitvc replied to younameitvc's topic in Sure Cuts A Lot Pro
Omg you guys are lifesavers! Amazing! -
Been looking to get the Titan 3. It is going to be a great upgrade from my SC. I will still use my SC until the wheels fall off but my interest in the Titan 3 is it's capability to cut tint which can hugely increase my profits rather than hand-cutting. Any thoughts? Any reviews?
-
Sick of hand cutting tint. I guess this one has the new suction feature to help with tint cutting? Anyone have any thoughts on this cutter? Is it worth the buy or save for a q-series 42 or graphtec
-
So how about this. I am coninsidentally looking through my office and I find the damn null cable provided with the cutter. I hook it up and boom the test connection works. However through a few cuts the lines still are just randomly cutting at all angles. Very confused.
-
Ordered. Thanks
-
Its just a 9pin to 9pin serial cable F-M. Once again getting it from the local computer shop. I don't know if they understood what my usage for it was.
-
I turned cutter on. Hooked in keyspan with serial cable female to male. Driver installed automatically. Opend SCALpro and located port. Tested connection and nothing. Anyone know why the NULL cord makes this all work? What settings in SCAL were you wanting to know?