Primal Decals

@mchldelf

@mchldelf

You can order extra bars.$4.00 ---http://www.grizzly.com/products/t27630/parts The link is on the same page you posted. Underneath the Click To Zoom tab ,Its lit up in purple as Purchase parts.

Thank you . Studied my camera for a few months and and then went on a professional photo-shoot one time with a local pro and i was on my own afterwards. Its relaxing .

@mchldelf i use a titan 2 . If your blade holder ( Purple casing ) is using to much down pressure grams from the cutter it can cause it to grab( hold) and cause a ( i call it a pivot point ) like what it did in your video causing it to hold on one side and push the other side. What pressure are you at as well. I know each cutter will be at different grams but i am curious ... If needed i can talk to you on the phone as well. I will send my number to you Do use Mz Skeeters suggestion for setting blade depth for a starting point . I did the same thing but made an extra adjustment beyond that.

Thank you Sue2.

just a few of my things ive done

I heard reflective will hold the heat. but not sure on that. I know a guy on youtube that uses it for brake calipers.

CIRCLE CHART FOR GLASSES use one top and one bottom line according to the glass and then make my design fit within that curved area. Those radius' are bigger than most of the stuff I work on bu.eps

I use siser HTV and oracal vinyl-------- I run 2 and 3 pinch rollers depending on the width for small stuff. But from what i can tell is the blade holder ( purple) is rubbing on the material causing this. I have tested something on my own cutter and it work worked perfect everytime. Take your blade holder out and use a thin washer or o-ring ( which i actually only had a o-ring for your car A/c pipe parts( light green color) . It raises up the blade holder a few mm to give space and i was still able to tighten the blade holder as normal.... Like i said worked perfect on my tests. If you can find a plastic washer that should work aslo. 1. Also what pressure are you at on that cutter. 2. What cutter is that ?

Glad to see your back bud. Ive stepped up and got a hotronix fusion 16x20 press doing good on that. Still learning new areas in that and figuring out new material, And i got back into my Photography business as well. Really glad to be doing it again.. Cant wait to see some of your new work.

Dont buy a copam then i guess lol.. From what we found out on @cardudenc computer that when he updated his windows 10 it did mess up for a sec and then found out that the ports had gotten changed during the update So all we does was relocate them and problem solved. And hes running just fine with Vm and scalps ,But his primary is scalps now.

@cardudenc i believe he runs windows 10 with his cutter and i think he runs Scalps4pro and Ai as well. Check with him..

According to craftedge tech support you can send a system file of the cutter and with the cutting software they can tell you what to use. And i just checked the support list and vinyl express cutters is in the list now.http://www.craftedge.com/products/products_scalpro.html

@racinboy30 Im willing to spend time and show what i know and do with it , I have helped many since i learned from here. Of course it depends on what your trying or needing to do in it . But for what i do with non printed decals its a piece of cake to learn.. Send me a pm and we can set something up.

Ai rocks along with my cutter software in my own opinion.

Anyway of you wanting to do live view with me to take a look? I run scalps4pro and havent had that problem.Send me a Pm if you want or need more info on this . I help many people this way doing live view. Ask @cardudenc. Im his main tech-design helper now .And i always do live mode with him.

Copied from Mz Skeeters comment---- This is how to set your blade depth correctly To start with, you should set your blade depth correctly, by taking the blade holder out of the machine, and firmly cut across a piece of scrap vinyl, you will be cutting. You should only be cutting the vinyl and barely a mark on wax paper backing, Adjust blade to get there, Then put the blade holder back in machine, and use the force of the machine to get there, same results, only cutting the vinyl and barely a mark in wax paper backing. You should just barely see or feel the blade tip out of the blade holder.

This is actually labeled as 4.063 but it is 4.064. Whats new? Here is the link. http://www.craftedge.com/download/download.html Fixed a problem with cutting with CAMEO 3 cropping off design Fixed a problem importing certain SVG files Fixed a problem with the Brush and Erase tools Fixed a problem with incorrect weed lines Fixed a problem with Cut Extras tab cutting rows/columns switched

It was the same on mine as well till i manually update from the website. craftedge.com download newest version that is out .. If you need help let me know. For some reason the auto updater isnt working properly and i let them know .

Soooooooooo much easier to do in Illustrator.. pretty simple and fast actually.

Thank you bud. A real life saver....I would be willing to buy some info from you on this for what pressure and material etc you use for poly -poly cotton and so on.

i can understand that with the marks , but i would be worried about not having enough for it to hold? but if you say a 3 which is no where near a firm pressure then i guess i will give it a go at 3 ? its a new press also .

a 3? Isnt that way way less than what it says to use? Now im really lost lol. i got the pressure info from a video from stahls on what each category for pressure meant . Lately on my siser stretch i have been using a 6 which i understand it to be a firm med pressure per catalog info. Oh boy...

i cut my carbon fiber at the same as my 651 no issues with a 45*.