hairyconiption

Hmm I will try bringing the blade in and see if that helps. I sure hope it does. Thanks

If you bought the cutter at uscutter it almost certianly came with some software. Check your documentation for a licence code.

I am having the same problem with my pcut. It is really frusterating. If i put the pressure up higher then it just cuts through the paper. I was able to make a slight SLIGHT improvement by adding a small amount of weight in the form of two nuts taped with black tape to the top of my blade holder... I think I am just going to sell this machine and get a new one.

I usually start at $10 a sq ft and then drop off about 30 bucks to make them feel like they are getting a good deal. I charge $35 an hour to install, and only once has someone not had me do the install.

I have had a lot of problems with the internal lettering colors. It seems in illustrator after I trace out the letters, if there are multiple colors there will be an "o" or "a" with the inside a different color than the actual letter was painted.... anyone know how to overcome this?

I would suggest at least a 24" machine. They can do about 90% of what you might ever want to do.

That video was great. You move fast!!!

Hey, can any one help me. The other signs shops in my area all can get there materials in within a day, Any ideas of an Idaho or utah based sign supply company. Thanks

Thanxs so much!!!

I think this forum is the best costumer service I could imagine. So many educated (as in they screwed up first) people to help us all along our way. I second the THANKS!!!

That works well. I ran out of 2 ft app tape a couple weeks back and was moving, but had a HUGE job, I just overlapped the 12" stuff, no problem. Good Luck

Make sure you have the right cutter selected. I thought I did when I first started with mine but I had the wrong one installed. ooops

I can vouch for Ken on this one, He has responded every single time I have had any query, and I have had a lot. This counts for both online and on the phone. In my experience, people who ask nicely and contribute, have a better chance of getting a positive response.

I guess I gotta start talking more.

I have tried a couple types of specialty vinyls and they are all brittle and Bubble when I try cutting them. Is there any chromes out there you guys cna reccomend? Thanks

Wow that looks great. Could have used it a few times last month.

Hello all, Does anyone have Sign-cut and want to trade for sign-blazer. I have an unregistered, un everything copy of sign-blazer and need sign-cut to work with my mac. I have sign-cut already installed on the mac, but sold my plotter and gave the guy my software, I don't want to mess him up by running it on his license code. I will mail original disc and e-mail serial number so you can get started right away, if you will do the same. Thanks Dustin

I had a Refine, loved it, used it, sold it. Now I have a pcut and I h@#e it.... GRRR. how do you tighten the pinch rollers. Can you.. they keep slipping and screwing things up....

Give it a couple weeks, I always am frustrated with my new machines (as I learn how to make them work) but once you are set-up right they run like champs... My business couldn't be possible without this forum and USCUTTERS THANKS!!

Well I am think I am just going to roll a small bit of tape on the pnich roller to see if that increases the tension. If that doesn't work I may need new pinch rollers cause this really isn't working the way it is. Thanks Dustin

It doesn't look cracked, I have given a fairly good examination, The rollers simply don't puch hard enough on the vinyl, so If it is cutting or sometimes just moving to a position it gets totally messed up (almost every time to varying degrees). Usually only .5 inch per foot or so (STILL ANNOYING). Oh well I guess I will have to manufacture my own solution. GRRR.

Thanks, I got the plug in for Signblazer.

Hello, I need some advice if I should get Flexi starter. I have been using signcut, just fine, but have to buy another copy because I got a new machine with signblazer which doesn't work on the mac. So since I am going to be spending money (unless someone wants to trade) I am wondering if Flexi is a worthwhile upgrade. As it is I do all my design work in CS 3 and open signcut. Any suggestions or comments would be great. Thanks Dustin

A starter pack would be GREAT! Although now I don't need one. At the time it sure would have been great.

Greetings