-
Content Count
40 -
Joined
-
Last visited
Community Reputation
0 NeutralAbout three47b
-
Rank
Advanced Member
- Birthday 01/01/1
Profile Information
-
Gender
Not Telling
-
Does anyone have a good jpeg of realistic looking hair clippers that I can vectorize. Thanks in advance!
-
Welcome, I believe uscutter sells replacement blades.
-
Yes ,that and some more blade adjustments
-
Speedoggy as always you've come through for me once again thanks for all your help you
-
Whatever the default setting on flexi is for the offset is what I have it on. Is there a recommended setting. If you dont mind could you give me a brief explanation of the purpose of the offset is
-
I'm sorry I failed to mention that my blade never went thru the backing of the vinyl
-
Thank you for the prompt response my speed is at 40 & pressure 170 you'll have to give me a day to post a pic. Thanks Banner john I'll try that. I'm cutting with flexi-starter 8.6
-
I was wondering, realistically, What the limitations are as far as text size for the copam 3500? I am finding that no matter what size I cut, edges are getting peeled. I have adjusted the blade depth, to way under half of a credit card width and also adjusted the pressure & speed several times to try to find the right combo, all with no success. Different settings do offer better results but no definite fix.I would also like to mention that I am using the factory blade that came with the machine. Should I buy another mfg's blades( any suggestions?) The blade is only a week old and has cut less than 3yds of vinyl. I have a P-cut ctn 1200 that does not give me this problem. I purchased the copam with the understanding that it was a better machine, which in all aspects except the above mentioned problem is. Any input would be greatly appreciated! Thank You all in advance.
-
I believe you place the cursor at the letter you want to kern then hold function key & the arrow of the direction you want to kern. Hope this helped
-
I could really use some help! I'm trying to cut 2 color layers for some boat letters. I created my reg marks on the image but when i cut the 2 seperate colors , the bottom color doesn't line up with the top layer. I'm using a light table so the difference is really visible. It's as if the tile size for the bottom color has changed. Is there a setting in flexi-starter that I should be using for 2 color layers . How can I get the bottom layer to outline the top layer how I have it in my original eps. Thanks in advance
-
#2 of the new choices is my choice.