Hornnumb2

Where can I get blank jerseys? Thanks

Store bought or make your own? Thanks

I am going to restripe my travel trailer and wondering since I will be doing it wet could I get away from using transfer tape? Of course you can see how white it is under the stripe compared to the sidewall so alignment is critical. Thanks for any suggestion. Michael

Well I wasn't happy trying to do it my way, so I am going to try the 3m tape. Anything special about application on it?

Bought application fluid or homemade?

Thought this might help somebody..Here are the instruction if needed.Michael Sunie Sliding Table.pdf Sunie Sliding Table.pdf

I need to cut a 10 foot piece of vinyl, what is the best way to load it? I have a been pulling out about 6 foot and watching it go back in to make sure its straight. Any Tips? Thanks Michael

I need to redo some graphics on a travel trailer that sits outside all the time, which vinyl should I use? Thanks

Looking for some late model detailed sillohettes for my office, I have 2 mustangs but would like some other makes. Thanks Michael

help on this one

Air Millhouse is what it turned out to be. Thanks

Can you post the eps, so we can see what is happening. Thanks

I got the game template that was posted but it doesnt have the touch in there. Thanks Michael

new plate for my ride...

I can see where that would help, but on the diamond plate it is all printed so I don't think white are gray would make any difference for this one.

Its sublimation, only way they come is white that I know of. Michael

Try this

I tried AI cs4 and Corel 4 with no luck.

Haven't used these people but they are not to far from Dallas Area, Hill Country Screen Printers 512-847-2543... http://www.facebook.com/home.php#!/pages/Hill-Country-Tees/191210730892259

Does anybody have a file saved that I can try, I have a file that I made but when I go to do the contour cut it reads the first mark but can't find the second...Not sure if it is my file setup or just me....I just need something that somebody has already cut on knows it works. Thanks Michael

I think you need to convert to curves in coreldraw then it should cut the text also. You can go to view, simple wire frame to see exactly what will be cut..Hope that helps. Michael

You can buy as little as 5 sheets here... http://www.specialty-graphics.com/jet_pro_sofstretch_transfer_paper_category.html

About to do my first shirt for my BBQ team, I cut this design out but some lines are very thin and not sure how they will hold up. Is there a way to make all lines bolder? Or can I combine or take away some cuts in the separate images? Thanks for any suggestion. Michael hell why.ai hell why.ai

I might sell the stand off my CE3000 MK2 if I can get my master stand to work with it. The rollers on my master are so much smoother. LMK Thanks Michael

I just started using siser easyweed but isn't it suppose to be smooth? and not take on the texture of the fabric? Is that a cotton shirt you used it on seems like a textured weave..MB