arty-rc

Welcome from SE Florida

Today's forecast down here is, Sunny and 83 degrees. I'm not sorry that I left that kind of weather back in 1971.

Don't forget to Weld!!

Have you checked the mouse settings in the control panel?

One trick I use is to fold the shirt in half, lengthwise and press for 2 seconds. This will give you a center line on the shirt. Fold the HTV, non sticky side, in half. Cut a small notch at the top and bottom at the crease and you'll have the center points on your HTV. Line up the HTV center points with the center line on the shirt and press.

Welcome from SE Florida

You'll think your in heaven!!

Did you download the drivers from the US Cutter site?

Happy, Healthy, and Safe!!!

Read the manual 3 times, jump up and twist to the right, jump up again and twist to the left. Sit down and bang your head on the table twice and read the manual 2 more times. If that doesn't do it, call it quits for the day and repeat tomorrow.

It's too cold up there for me. I left that cold weather back in 1971. Just take the drone out of the box, install a charged battery in it and the transmitter, find an open field and start flying it. Keep it close to the ground until you get the hang of it.

Have a Happy and Healthy to you and yours, Scotty.

I resolve not to drink any more beer. No less but no more!! Happy new year to all.

I've been searching the web and Google for an F-14 Tomcat jet front view. I did find a few but they vectorized very poorly. Basically, un cutable. I need it for a friends truck rear window. 36" long. That is why I need a "clean" file. Thanks

I'm looking for a 55 Chevy Hardtop line drawing file. True to life would be great but I might be able to use a clip art line drawing(if my friend approves it). He wants it for a friend of his. I've searched all my files and discs but no good. I tried Google, still no luck. What I need is a decent file that I'll be able to Sandblast for my Edge Lit Glass. I will keep looking and try to do a manual trace of a photo. Thanks

Gotta love Windows 10 updates. Apparently after the latest updates to Windows 10 a lot of the fonts in Signblazer vanished. I was using the UK version of SBE for years without any problems. A lot of my files used those now missing fonts. My one backup laptop did not lose any of the fonts. What is my next course of action to get them back? Thanks.

Thanks Sue. I copied the fonts to a new folder in my documents and will move them as needed. Still think that it's strange that it only happened to one of my four computers??

Welcome from SE Florida.

Still having problems. I went to my files in Signblazer to re-make a sign that vanished at the club flying field. The sign file showed up in both the "open" files and the history files but when I opened either one my work space was blank. I put a select box around the work space and went to my text and selected a different font. The newer font showed up fine. Apparently the lost fonts don't affect the files but won't appear when you open the file in SBE. I did a web search for the missing font, did a download and installed it into my computer fonts folder and when I opened the sign file the text was there. Since all the fonts are still in my backup computer, could I go to the fonts file in the Control Panel and copy them to a flash drive and then paste them into the fonts file in the other computer. Thanks.

I started using Signblazer when I purchased my MH-365 cutter and am still using it with my Graphtecs. Many of us on the forum still use it. The more that you use it, the more you will find it will do.

Just finished three more for the wife to take back to camp. I hate the way my Iphone takes this type of picture. They look much better in true life.

You could always check on sites such as Craigs List. I picked up a second CE 5000-60 for $500. I checked it out and all it needed was a new cutting strip.