-
Content Count
1,161 -
Joined
-
Last visited
-
Days Won
18
Content Type
Profiles
Forums
Gallery
Everything posted by mfatty500
-
I use CDx7 with CM3 on my Windows10 machine with no issues, like skeeter said, maybe a W10 update wiped it out. I have had W10 do exactly that with Flexi once, eiped it out that is.
-
You could use a teflon pad made for sleeves and leg prints, I have also used a sock jig for sublimating socks
-
Converting a .fs file into and .ai or .eps file
mfatty500 replied to kenman's topic in General discussion
I get a unexpected file format, can't you just export the file as a PDF, or an eps? -
This site works the same as dafont, https://fonts2u.com/
-
Remember to use paper transfer tape if doing it wet
-
These guys will sell by the foot & slit full rolls for you https://www.specialty-graphics.com/
-
This please, if it is a font FMF, has been no help so far..
-
Slice,not trying to replicate this text, needed it for other words, thanks to you also Mark
-
I have cut Hartco 425 with my Graphtec, but it is a little thinner material, i just cut it with 2 passes
-
Did you try to weld it in Flexi first, auto weld did not change anything in production manager, are you just cutting in flexi, from AI?
-
Need help with Flexi 8.6
mfatty500 replied to termagator's topic in USCutter Refine Cutting Plotter Support Requests
I use Flexi 8.6v2 on windows 10 & 8.1, with no issues. -
Picture? Do you mean the font?
-
if you like pinstriping and gold leaf . . . ..
mfatty500 replied to Dakotagrafx's topic in Off Topic Section
And this one from 1978 -
if you like pinstriping and gold leaf . . . ..
mfatty500 replied to Dakotagrafx's topic in Off Topic Section
Here's an old Indy Car from the 70's that my uncle and cousin painted and stripped, and another from 1980. That's my Uncle on the far right & his son in the cowboy hat. I used to love watching them paint and the smell of turps and paint, oh..and a few beers and shots were consumed while doing so. My cousin is still doing it at the ripe young age of 76. And all was done freehand, no masking tapes involved -
CE6000-60 Plus, Issues with smaller fonts?
mfatty500 replied to ericmschwanke's topic in GraphTec Cutting Plotter Support Requests
I run my Graphtec outside in my garage yearound, and my vinyl never ripples up like that. What brand of vinyl is it?- 120 replies
-
- ce6000
- cutting issues
-
(and 1 more)
Tagged with:
-
CE6000-60 Plus, Issues with smaller fonts?
mfatty500 replied to ericmschwanke's topic in GraphTec Cutting Plotter Support Requests
Is the Blade holder carriage tight on the rail?- 120 replies
-
- ce6000
- cutting issues
-
(and 1 more)
Tagged with:
-
Time to back up those files you've been putting off.....
-
Those pins are for interchangeable platens, I have a GK label press that has them. As far as the wire I have no idea. Call Geo. Knight, they are very helpful
-
I back mine up every month on the 1st. sometimes twice a month
-
The G appears to be modified https://www.dafont.com/horizon.font?text=GILSON
-
im sure this is new topic.... help deciding on machine
mfatty500 replied to stickchick's topic in Pre-sale questions
Do you have the work for a 52" machine or do you want it because it's big and within your budget, or for the wow factor? Do you have the space for it and a work area big enough to weed and apply the transfer tape, much less laying it down in one pass? I would get a higher end machine, and save yourself a lot of aggravation in the long run. Plus the fact that those big rolls of vinyl can get expensive, not to mention the waste (and shrinkage from laying around because of not being used) if you only need a much smaller decal. Just my 2 cents... -
Here you go: (removed due to copyright material)
-
Converting a .fs file into and .ai or .eps file
mfatty500 replied to kenman's topic in General discussion
It says unexpected file format, you sure it's a Flexi file or even a vector?