drawn

Holy necro, I know but I had the same problem and came to find out if any lubrication is necessary on the solenoid as mine was stuck. with my index fingers beneath the solenoid I pressed down on the top where the linkage connects and it freed up. I worked it back and forth a few time and it seemed to cut fine. a few hours later it was stuck again. It's also pretty cold in my shop lately and the manual has temp ranges for operation that I was probably below.

And this may be of some help in obtaining that driver; http://www.prolific.com.tw/support/files//IO Cable/PL-2303/Drivers - Generic/Windows/allinone/PL2303_Prolific_DriverInstaller_v1210.zip

I just deployed an HP laptop running windows 7 and went here for the serial driver update. Worked perfectly!!! http://www.prolific.com.tw/support/files//IO Cable/PL-2303/Drivers - Generic/Windows/allinone/PL2303_Prolific_DriverInstaller_v1210.zip unzip the file where ever you usually do and run it.

Hello, Haling from Southern California. I decided it was time to make some of my own templates vs subbing the projects out. I'm starting with a used P-CUT from one of the members on this Forum. I won't have to do a lot of cutting so I thought starting here in the trade up chain would be best. I look forward to sharing but now I'm off to try to make the Sign Blazer software download work. I don't think I need much as my main thing will be masking templates for Airbrush, seeing the word addictive in other introductions has me a little concerned as I hadn't thought of all the other possibilities until now. My Best to all on the Forums drawn