pyrophire

Made 2 registration marks up top and lined them up, not so easy to do with normal application tape. I should order my clear app tape soon... got another band interested in the same work...

Why is USB bad?

Laird Plastics - 214-350-3990 Fellers - 888-863-8383 Huh....not finding it in the fellers catalog......I'll have to call em bout it. That info is directly from Mactac's Rep, she gave me the numbers

Laird Plastics - 214-350-3990 Fellers - 888-863-8383

You need to specify what settings you are printing at, I have modified drivers for my workforce 1100 and can print at the highest quality on that exact same vinyl (trimmed to fit into the printer) and cant see any dots from printing

What transfer material do you all recommend for doing tshirts, White image on black Gildan 100% cotton. I got the sample of SISER EasyWeed and it was rather easy to use with my very old Roach heat press. I noticed that signwarehouse carries a lot of different materials but I have only tried the siser easyweed.

Alright I got my Cobra 1100 today, along with the Mactac sample and printed up some stickers for a local band. Sealed them with some frog juice and they are amazing, they are thicker and flexible, they dont tear and I assume are waterproof. I'll take some photos of them tomorrow to show you all. Also my samples of Sihl's stuff is here, but not what I wanted... I'm assuming the mactac stuff is the same as sihl so yea.

the sample i just got is thicker than standard vinyl so i dont think it will conform properly, especially after over laminate or roll on sealer

If you use signcut, it lets you print out a sample of what it will look like, you can specify the sizes in the provided boxes along with materials being used

oh yea its not locking down so its only about 1/3rd the pressure so it wont bind into the material just sit on top, once it dries out it will flake

Get the affordable MH Refine series, they are a great learning cutter, get ahold of a copy of illustrator or use something similar with signcut. I have the 36" but I only use 24" vinyl, so a 24" cutter will be fine. Right now im using 3M because its what my local supplier has but I will be switching over to Oracal 651, it will be perfect what you need it for. You say you will only be doing 3 or 4 cars, but you will get the hang of it and realize you can do a lot of work I got my cutter on ebay for $330 from uscutter's account, $100 less than listed on the site so I'm sure you can find a good price.

you need to specify exactly what you need to edit, maybe show an example of the image or something...

Or just learn the pen tool, it is amazing when you get the hang of it. Sometimes its even easier to redraw it than try to live trace or vector trace it.

Not empty, the numbers are white

Was looking for a paper cutter on OfficeDepots site and ran into this little thing: http://www.officedepot.com/a/products/371360/Pacon-All-In-One-Paper-Cutter/ I think that would work well for application tape... what do you all think?

Heres something I have, needs to be modified to fit perfectly shld.eps shld.eps

Heres another file for you, its pretty clean overall, might need 1 or 2 nodes fixed if you need it really clean. matthew car 15.eps matthew car 15.eps

hi hi from texas

Hi from West Texas!

Hello from west Texas, the wild wild west... lol

I also put in that request with MACtac the day I posted the contact info for mactac rep, anything water base printable needs to be matte or else the ink stays wet and smears, i dont know about the thickness.

My local distributor sells the SIHL and has alot in stock, they are Reese Supply, they are located in these areas

I think maybe a x1.1, x1.2, x1.3, etc would be a way to do that, based on complexity

Think about it in the other direction, order a 36 or 42 inch roll an cut them in 12 inch strips, that way you have 12x36 inch pieces to feed through

Alright, ill put in my order later tonight. I just ordered 2 cans of frog juice as well, spray type.