Kenla

Members
  • Content Count

    274
  • Joined

  • Last visited

Everything posted by Kenla

  1. Hi & season's greeting to one & all. I do hope that the year was good in terms of health, acheivements & business success. I kbnow that some of you run & manage multiple small business while constantly on the move _ can you please advise how you mange it, what cell phone apps & or mobile pbx systems you may be using. Have a safe, enjoyable season .
  2. Hi Good day everyone. I need your help on how to approach remove & clean out all this solidified emulsion on this "Expose IT VRS, I've just inherited please.The light table works but is in need of a timmer, a new Neoprene Rubber & some TLC. I do not want to scratch the glass although I want the entire unit cleaned as I am in need of the unit but can't use it the way it is. Cheers
  3. Thanks very much guys. I will put into action both your suggestions.
  4. Kenla

    Replacement Carriage for LP1 24"

    Please accept my apologies Skeeter for my tardy response and show of gratitude for your help. I was out of state only returned yesterday. Anyway I did follow your advise & contacted the link you provided. Although I agree that the carriages really do look the same, they ask me for photos of my carriage which I sent them, they are saying that my carriage is not their product. I am still searching & hope that I may find someone with a spare or unused one. Thanks again. Have a good day. Kind regards.
  5. Hi & good day to all. I am not sure whether this is the right place to ask but do wish that someone would direct me where to begin my search for a replacement carriage for the LP1 24". I have contacted US Cutter, however was informed that these machines are no longer in production hence they do not stock replacement parts for them. I am in need for a carriage & would appreciate any help provided be it the offer of an unused carriage for sale or pointing me in the direction of where I can buy one. Have a good day every one.
  6. Kenla

    does anyone have this

    Thanks
  7. Kenla

    elephants?

    Thanks
  8. Kenla

    Dive Flag

    Thank You.
  9. Kenla

    Etched mirrors

    Nice work
  10. Kenla

    Layering with Parchment Paper

    Great video. Thanks for taking the time to do this.
  11. Hi & good day to all. I've tried what's the font but my efforts have been all futile. Can you please help by identifying the fonts please.
  12. Been away for a while. However just dropped by to thank everyone for their help & contributions. I haven't had the time to rip apart that cutter as yet since it is already in a state of be non-productive, hopefully next week I will attend to it. Have a lovely weekend everyone.
  13. Hi & good day to all. I need your help on this one please. Well my LP24 has decided that it's taking a break from cutting vinyl, so a friend has decided to lend a hand but he is using WinPCSigns. I need to create Ai files compatible with WinPCSings for my vinyl cutting. My files were created in Inkscape & taken over to a friend who has Adobe Illustrator but can't explain a hoot about it. Anyway when my eps file are imported into Illi, the expand feature does not seem to work on my files. Hence I can't create Ai compatible files. Can some please tell me what it is I have done wrong or did not do, so that I can remedy the problem. I have attached two files for your examination & suggestions. Chief_Inspector_Asst.eps Manager_Compliance_&_Records.eps
  14. Thanks to all. Yes I have lifted the cover, poked and looked around. On the face of it everything seems to be alright. I will keep looking though. Also I will do as suggested ie. will save to a lower illustrator version. Thanks again for the help.
  15. Kenla

    In memory of paramedic

    Thanks for the copy.
  16. Hi Mz Skeeter, well the cutter I was told is a LP1 for starters. Anyway the carriage simply won't go down to execute the cut although it goes through the entire motion. Only when it's done not a mark on the vinyl. Thanks for a prompt response.
  17. Hi, I have opened it. Your apparent silence to my cry / help forced me to think that probably my question on how to get the outer casing off the carriage arm may be rhetorical in nature. Hence I started thinking & exploring the outer casing. I gained access to the carriage arm & everything, on the face of it seems to be ok but the problem remains. The cutter goes through the motions only there is no cut upon completion of the motions. Thanks I will contact US Cutter. Have a great weekend.
  18. Hi good day to all. I desperately need your help in sorting this one out. I was busy fine tuning my blade depth to cut some vinyl. Trying to get the blade to cut but just scrape the backing material. I spent a lot of time doing that & just when I was about to get there, the cutter a Lp24 carriage arm would no longer move downwards towards the vinyl to cut. Thing it was doing the test cuts all along with no problem when suddenly it would go through the entire motion of cutting, only this time it would not cut whatever motion it just went through. I have searched this section for a possible solution & I am wondering whether there was a possible disconnection due to me over tightening the blade. I really do tighten that nut. The outer carriage casing appears to have loosen, do I need to remove the entire top of the machine to get to the carriage arm? Your advice would be greatly appreciated as I've got some vinyl to cut. Take care.
  19. Kenla

    angel wings

    Thanks