-
Content Count
66 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Everything posted by Luvmydane
-
I am new to sublimation and I am having issues with scorching. Any help and insight is appreciated. I mostly get the scorching at the top of the shirt along the top edge of where the top of the transfer paper was, periodically I will get it on the side but not too often. I have tried to adjust the pressure but that just was a mess, and the temperature adjustment then makes the color not so vivid. Should I lower the temp but keep it in longer? Would that help? I have worked on this for days without success, just when I think I got it BOOM it messes us again...lol any help would be great! Refuse to sell anything until I have this down
-
Does any one know what is causing these dots on my sublimation printer? I have only had it a month and was too busy trying to figure out times etc didn't notice them until now. I thought I was burning the polyester, but now I see it is on the paper
-
The lines are very consistent so I am thinking it is a roller issue. I have run nozzle check and also cleaned a few times just to make sure. I have been trying to figure it all all day. I bought the machine a month ago and saw the lines, but I was having other issues and actually thought I was burning the fabric, when I finally got the other issue resolved and watched a great beginners youtube video, I realized it was actually printing on the paper but was so fine I could not see it until we put it on fabric. Of course the seller is not helping at all, and I absolutely realize you get what you pay for. I thought I was safe as a friend purchased first and had no issues. I just wanted something very entry level and would move up if we made any money from it. Thank you for trying to help me, I truly appreciate it. Shelley
-
Epson WF 2750
-
Can anyone give me suggestions on where to buy 100% polyester tanks, that feel more like cotton. Thank you in advance. Also looking for same in onesies
-
Thank you so much!
-
I did check the temp with an IR gun and we are pretty accurate there. Do you know off hand what a good time and temp is for a polyester shirt? Thank you for responding earlier!
-
Thank you, I also use JiffyShirts and love them. Do you mind telling me which tanks you use? I have ordered a few and they feel more like athletic wear than the cotton feel I am looking for. I have used the tshirts from them that feel like cotton but have not found the tank. Any advice is appreciated, looking for 100% polyester so I can sublimate on it without fading post wash.
-
Can anyone tell me the font used in Drink and Hand in this layout, or something close? I purchased this layout but need to put something on the backside of a glass and would like to match the font. Any help is appreciated. sun_sand_drink_hand_kh.svg
-
Thank you so much!
-
I am trying to make a template for a shot glass I saw a youtube video where she was using the wrapper tool/function, but I can't find it. I am brand new to the SCA program. Any help would be greatly appreciated. I have SCA Pro 3 that came with my cutter
-
I am wanting to add Koozie drink holders to my business and was wondering if any one is familiar with how to print on them. I have looked at two ways, pad printing and screen printing, any ideas?
-
Thank you for your input. I need to use different color ones and I think it would be too much weeding with the HTV as my plan is to be making hundreds of these. I think I might need to learn screen printing =(
-
Thank you to both of you. I will look at the 951 as it is not for a wall, it is for a sign and it is okay if it is permanent.
-
Does anyone know where I can purchase coral vinyl? I usually use Oracal 631 but they do not have a coral and I am asked for it often. Any ideas?
-
I am thinking of buying the PCUT, I will purchase with a stand, but was wondering what the basket option is for and do I need it? Thank you
-
What is the basket option on the Pcut used for?
Luvmydane replied to Luvmydane's topic in Pre-sale questions
Thank you so much for your input! -
How do I check my port settings? Could this happen, even though I was cutting and then just changed vinyl and then when I cut the next one it started giving me the message? Thank you for your help.
-
I have a Creation PCUT that I have had for 3 years and use often. Last night in I cut several items and then went to cut another and I got the message "Can not open the output device. Error intializing cutter" when I have got this in the past I turned off my computer and restarted and everything was okay, this time I cannot get it to work. Any ideas or help would be appreciated, Thanks so much!
-
I have plugged and unplugged several times, already, no luck. I wonder if there are any settings I am not aware of that may have got changed. This is the first time I have had this problem that won't correct.
-
Hi All, I opened a little at home craft/sign business a couple of years ago with a Pcut and now think I can expand it a bit with shirts. I was wondering if someone or two or three... would post some pictures comparing what the shirts will look like with siser easy weed, chromablast, and SubLjet, as I am trying to figure out which will be best for me to invest in. I know the latter two will require a printer as well, and my plan was to buy the heat press that is on special this week. I am also aware of the subljet requiring polyester shirts versus the other two can use cotton or 50/50. Any other advice is appreciated. Thank you in advance. Shelley
-
I purchased this saying as an eps.layout but now I have a customer who would like something else in the font of like the "Mother" does any one know the name of it?
-
c I am looking for the name of the font for the Married.
-
Just looking for some input, I want to buy a printer to do t-shirts, so far I have come up with two options the Ricoh GX e3300N or Epson 1100. The Epson comes with the larger external ink resevoirs. Also just to clarify "pigment ink" is what I would use for t-shirts right? Also what is your opinion on presses clam shell or swing away and why? Eventually I would like to do license plates, tags, coasters, and mouse pads (not sure if they will require different ink and another printer. Thank you for any input. Shelley
-
I bought my sandblaster last week and made etched pyrex pans for a auction our church had for a girls camp fundraiser and the next day made a set for a bridal shower gift. Great way to advertise, already have several people wanting them now. I was so busy I didn't get pictures, but now I have an excuse to make some for myself.