Streamline

Members
  • Content Count

    20
  • Joined

  • Last visited

Everything posted by Streamline

  1. Hello all: We are having trouble with our fairly new MH-871 plotter leaving waves in stead of strait lines. Take a look at the picture Im posting with this post and see what you think. What Im using: US Cutter MH-871 Purchased in May 2011 Sign Cut Pro Serial connection Dell computer with windows 7 2 Gig Ram 2 SATA drives Main drive 150gig with 110 gig free space. Things that I have tried or have had to replace recently: Mother Board Z-Chip Different cutting program New Blade Sprayed WD40 in blade holder ran plotter at slower and faster speeds changed blade pressure called US Cutter Support I need help this dosnt look good on the signs im doing but I have no choice but to do them.
  2. Guess Im the only one with this problem! And the US Cutter tech's dont seem to know either. I looked at some signs I did 6months ago when I first got this cutter and it wasn't doing this then. any input on this problem would be grateful!
  3. It sounds like it is your Zchip, while it is easy and inexpensive to fix its aggravating that it pops so easily from minimal static. Just go to US Cutter and order you 2 or 3 Z chips so you have some back ups. They are 5.00 each. We have grounded our machine and the stand it sits on it will still pop the Z chip just from the static that builds up on the vinyl while pulling off the roll. What I found that works is I will make sure that the amount of vinyl I need for the job is pulled off the vinyl roll then I spray Static Guard ( This can be purchased at LOWE'S comes in a spray can ) on the underside of the vinyl as well as the plotter itself and this has seemed to help us stop the static issue! Hope this helps
  4. Hi all I have been using my 14" US Cutter since I started doing small vinyl and banner jobs. I have a sign job that I can get that requires my letters to be about 3ft tall and probably 2 to 2.5 wide. Im going to need to cut 20 letters. Im thinking that this job will pay for the 36" plotter that I have been wanting to get from US Cutter for a while. My question is will the 36" wide plotter stay on track to cut a letter that would be 36" tall? I have read where the less expensive plotters are not good to use if you are going to cut over 1 or 2ft? Thanks Bobby
  5. Streamline

    anyone want to print some decals for me?

    If you want to go to our sight and check us out a little go to: www.streamlinegrafix.com We print full color stickers and they are laminated to stand up to fuel being spilt on to them. We sponsor several RC Racing companys and Full Scale Companys. I would be happy to give you a price on the work you need! I probably will throw in free shipping for you if that helps! email me at: bobby@streamlinegrafix.com if would like a quote on this! I should beable to get them to you fast! See ya:
  6. Streamline

    SignCut Pro vs: Flexi Starter/w Contour Cut

    Ok Good... Thanks for the help!!!!
  7. Streamline

    Propsal for screenprinted t-shirts

    They have not emailed me...Guess they got it already.
  8. Im trying to figure out what looks to me like the same problems yall are having. Im trying to cut a motorcycle image out with many little cuts that need to be weeded and hardly any of them are completely cut out there seems to always be a small piece left uncut and this reeks havoc on us! Im now using Flexi 8 program with the new Flexi drivers from US Cutter and even with all that still same issue. Im not good yet with knowing how to set the offsets settings and all that so I hope as I read yalls posting I can figure out what I need to do also!
  9. Streamline

    USCutter Driver Pack

    Thanks a BUNCH for that update! Finally got my MH365 to work better with Flexi because of the new USCutter drivers. Thanks!
  10. Streamline

    Help with file

    Hi; Is either one of these prints what you are looking for. I wasn't for sure on just what you are looking for. If these two prints I did is close or similar to what you are looking for you can distort your .jpeg image in Corel like this using your emboss tools under bitmaps. Hope this helps if not I can try again for you!
  11. Streamline

    Propsal for screenprinted t-shirts

    Hello my name is Bobby owner of StreamlineGrafix.com out of North Ga. If you will email me at bobby@streamlinegrafix.com with as much info as you can give me about this job! I will work you up a deal for this job. These type of jobs are what our company is known for in my area and I would be glad to see what I can do for you! We have a different process that we can do the names and numbers for each shirt more affordable for our customers and us and it will still be printed...No direct to garment printing here all our printing is using pastoral inks. I also need your location that the shirts will be sent to, How many at one time you will need, I need each division laid out with time frames for shirts to be completed. There usually has to be at lest a 2 week time frame for turn around on these jobs. There will need to be more info about this job but I will deal with that with you through emails and phone calls. Check out our website for more info on us also at: www.streamlinegrafix.com Thanks for your time; Bobby
  12. Streamline

    SignCut Pro vs: Flexi Starter/w Contour Cut

    I have been wondering what the Flexi Starter was because I my self have looked into using Flexi because a few of my friends have it but I have never seen any Flexi program that cheep??? I have not purchased a cutter program yet and I to use Corel X4 seeing how im in the learning stages for using a plotter and cutting software would the Flexi Starter be a good way to start out if I was going to spend the money?? Im using windows xp home and a small refine us cutter plotter MH365
  13. Streamline

    New user: Had a question about setting limits in Signcut?

    Ok now im getting somewhere the application launcher they are referring to in Corel strangely enough I have never used! That is were send to signcut has been hiding!!! I have been trying to find it in my tool bar tabs or under file!! :- Thats the problem sometimes of only doing one set of things with software you don't ever find out how much is available and how easier things can be in the software you are using till you take time to learn new stuff! Now that I found the send to SC button when I get back in today I will try using that to send the artwork to plotter and see if it will stay on track this time and not shift its lines off course during its cutting. Thanks again for that info and the help; "CRD" I will update as soon as I can do a test!!
  14. Hi All, Im a new user of US Cutter and Sign Cut. I have been around plotters quite a bit even used them a couple of times with Gerber and AI software. My question is in signcut X2 Trial version under calibration I cant seem to get it to calibrate without crashing into both sides of plotter walls. I have been looking through most of this forum for 2 days and have seen were people have had this similar problem for different reasons but there fixes have not fixed mine. Is there a way to set the limits on this plotter so it can go out of rang or set them in signcut? Also was wondering can I use Corel X4 to cut directly to the plotter with out using a second program source? If anyone has any ideas I would appreciate it. The previous owner is not able to help me at this time. My Unit: US Cutter MH365 Unit is just over 2 years old. Im second owner USB connection strait to computer Sign CutX2 Trial Corel X4 OP: Windows XP Home Serv. PK 3
  15. Streamline

    New user: Had a question about setting limits in Signcut?

    Ok thanks guys for the help!!!! At this time I have given up on the print directly out of Corel X4 like a printer would for now!! What I have been doing is I downloaded the Signcut Pro and at this time I can only export out in EPS.file to be able to see picture in SC. When I try to export out in a PLT.file I get a lot of lines and no picture in SC Im sure its just some setting I will learn over time! My question is I noticed that the eps.file when cutting out in SC my images after a bit seems to all start shifting to the right? I have read in places on here about different settings that you have to use when exporting files. Is there a way I have to export files to prepare for some kind of offset that happens in SC? If a picture would help I will try to get one uploaded! Thanks ahead of time for any help on this!!!
  16. Streamline

    New user: Had a question about setting limits in Signcut?

    Corel is what I mainly use at work, Im not the best there with it but I know my way around it pretty well. The problem I have is I've been unable to make the plotter show up as a printer. I think there must be a driver I need to use other than what I have in order to make the plotter show up as a printer?
  17. Streamline

    New user: Had a question about setting limits in Signcut?

    O''' Also if I down loaded Signcut x2 from US Cutter did I get the pro one yall are talking about works good? Mine doesn't say Pro! Also I was trying to figure out SC prices How much is it to purchase there software? I know from my friends that Flex is the way to go but unless they are going to buy it for me I don't plan paying there prices any time soon....lol
  18. Streamline

    New user: Had a question about setting limits in Signcut?

    Thanks for all the replys!!! I have a lot of reading to do!! CRD? When you say oops about refine using real windows does that mean I cant go strait from Corel to my plotter? Also I picked up my first roll of vinyl today and some tools to try cutting my first words after some more practicing with a sharpie marker...by the way thats cool to that you can place a sharpie in the cutter to draw!! Even though my printer does the same thing some how it just seems more satisfying when the plotter does it...lol
  19. Streamline

    New user: Had a question about setting limits in Signcut?

    Ok thanks for that. I was not sure if because the head kept running into wall during cal. if that meant there was something wrong with this unit. I have been using the pen application at this time testing the cutter. I have accomplished writing a few things and drawing a motor cycle....lol I did download signblazer from us cutter, I don't relay like the colors they use on there program but I seem to figure out how to use it better than the signcut. Witch would be better for purchasing when I get to do that? Wish I could just cut strait out of corel but o'well cant have everything....lol I changed the settings in sign cut to in. instead of mm little easier for me! I will not worry about calibrating seeing how at this time that doesn't seem to work write, but the cutter does seem to be cutting correctly.
  20. Streamline

    New user: Had a question about setting limits in Signcut?

    Im using Windows XP Home. I have been looking for a post about this particular issue. I will look some more! Thanks