babs

Members
  • Content Count

    17
  • Joined

  • Last visited

Community Reputation

0 Neutral

About babs

  • Rank
    Member
  • Birthday 01/01/1

Profile Information

  • Gender
    Not Telling
  1. thank you very much. i just wanted to make sure i was reading that correct because I bought this software for my laserpoint 24 and i have yet to cut anything with using this software, it works fine with signcut. it does not cut with the contour cutting feature. I have read everything, I have contacted support twice and i still cannot get it to work it does not even attempt to cut. Oh well thats 60 bucks lost. Again thank you so very much.
  2. CAN YOU CONTOUR CUT WITH VINYLMASTER CUT??
  3. babs

    Cutter will not jog with signcut

    fixed it reinstalled software and drivers again
  4. babs

    Cutter will not jog with signcut

    I fixed it. Reinstalled again
  5. So, I have had my cutter hooked up since 2008 and everything has been fine even when upgrading operating system. Well I just got a new computer installed signcut, drivers, etc... and it sees the cutter and has a com port assigned but the cutter will not jog when I try to set my registration marks. Any ides would be much appreciated. I am just about ready to scream. Thank you in advance. laserpoint 24 windows 8 signcut pro
  6. So, I have had my cutter hooked up since 2008 and everything has been fine even when upgrading operating system. Well I just got a new computer installed signcut, drivers, etc... and it sees the cutter and has a com port assigned but the cutter will not jog when I try to set my registration marks. Any ides would be much appreciated. I am just about ready to scream. Thank you in advance. laserpoint 24 windows 8 signcut pro
  7. babs

    NEED THE STEPS TO CONTOUR WITH COREL X3/SIGNCUT

    try this http://forum.uscutter.com/index.php/topic,25246.0.html
  8. Thanks for the link that is a great thing you did, it will help alot of people.
  9. Paco, You are the best. I know this will be very helpful to alot of people.
  10. I did it!!! I did it!!!! I did it!!!! Paco if you read this I would like to thank you for all your help, you are a wonderful person. It took me awhile but I was not going to give up. I have to use your registration marks if you don't mind that is the only way I can get it to contour cut. The only thing I did have to do was change my X and Y on the cutter and it did a perfect cut with your registration marks. Now if I want to stretch them out to make something bigger will that be okay?? The samples provided with signcut just do not work for me. The only other problem I do have is sheet gets caught on something when it retracts back in after the third registration mark is registered and crumbles the paper??? Any ideas?? I did hold it up in the front and managed to get it to roll back in and do the cut. Again thank you for your help. Barb
  11. I was and am using the template included with signcut but it does not work the paper slides out from under the rollers before it has a chance to do anything. So I am going to try what paco said and see if that works I do the front 2 registration marks and then when it goes to do its thing it falls right out from under the rollers. okay so its either me or the cutter??;D???
  12. I am using signcut pro 1.07 The sample Paco gave me cuts fine but anything else either comes right out from under the rollers or if it does cut it is out of alignment. Is there a setting that needs to be adjusted so it does not go out of the rollers. Do the registration marks have to be in a certain place? Even when I use the samples provided by sign cut it just rolls right out. My head hurts from trying to figure this out. I may never figure it out, everything else works fine I have cut out a few things and I have ctut out letters no problem just this contour cut and the 8.5 x 11 paper coming right out from under the rollers. Well guys I appreciate your help if any one can think of anything else please let me know, I will keep reading and trying to make this work. Thank YOu Barb
  13. Okay I finally got all the registration marks to work the way it did on your sample but when I hit cutout button it throws the paper out I used all the setting you said to use with your sample. I will keep on trying I am sure sooner or later I will get it to work all the way. I don't give up that easy. I do want to thank you for all your help. Barb
  14. Hey paco your sample and instructions worked great I was so excited I actually did a contour. But when I try to do it without your sample I have no luck. I am doing something wrong but I just don't know what. Setting it up wrong in corel, registration marks, contour line, I just don't know. I want to thank you for your help and I am going to keep trying to figure out what I am doing wrong. Thank you
  15. I am going to try it. I will let you know what happens. Thank you Paco