dcedar

Okay... thanks! I loosened the vinyl alot! Unrolled most of it. LOL. It seems to be working! (knock on wood!)

Software is activated. I am using the port on the computer. No keyspan. I will try unrolling and see if that helps. Right now I am too frustrated to go near the darn thing! LOL

Did this problem ever get resolved? I am having the same problem. Machine is grounded to the stand, I am using SCAL3pro, etc. I have connected through USB and Serial and still the same problems.

Thanks! The machine is grounded to the stand. I am using SCAL#pro. I have not messed with the roller tension since the vinyl seems to roll through just fine. I do leave the vinyl on the roll on the rollers. Could this be the whole problem??? I had the MH721 and did it that way with no problems. (I know, different machine may have different issues) One thing I forgot to mention. Sometimes the machine pauses for a few seconds, too the point that I notice it, and then starts cutting again. It could be normal but I don't remember if the MH721 did it or not.

Please help! My machine is cutting all crazy. It starts cutting letters and will cut a few letters and then drop down about half an inch and cut a few more. Then it will cut letters over other letters. What the heck is going on??? The machine is grounded and I have used the USB and the Serial Port with the same results. I have wasted almost all of the vinyl that came with the machine and I do not want to purchase more until I figure this out.