han7681

Members
  • Content Count

    45
  • Joined

  • Last visited

Everything posted by han7681

  1. hi when i turned on the cutter, Novram Init message showed then , the cutter didnt move at all, even couldnt load , tried factory setting - hold up arrow key and power on , but nothing changed. anyone knows why and how i can sort it out? thanks
  2. hi done factory resetting , but once power on , some weird things show on the screen , as below it is supposed to be 1st photo , any idea why? it may be cable problem? slightly damaged when it was pulled off. where i can this cable? thank
  3. hi originally it showed "Novram Init " thanks
  4. han7681

    what is Novram Init ?

    the photo is attaced. cant control any. , im using signblazer have to change motherboard? it it is replaced, what is need to set?
  5. hi i will print wall paper covering around 2x3 M as its size , will divide 3 or 4 section , overlapping 1 cm the photo size is 30 cmx28 cm (300dpi) 34.5 MB how to cut into 3 or 4 sections and change size and resolution in photoshop? thanks
  6. hi i have roland rs 640 and versa works will print on oracle 3268 vinyl thanks
  7. hi as showing on the photo. http://cafeptthumb3....y.jpg?type=w740 it is very thin plastic sheet , how do you call it and when we can get it? i guess it cut by Silhouette Cameo. can it be cut by normal cutter like ce-5000? thanks
  8. han7681

    any one know what material ?

    hi the photo is attached
  9. han7681

    why i cant merge ?

    hi i cant merge with the butterfly body with other part. how i can make one object? any idea? thanks butterfly body.eps
  10. han7681

    why i cant merge ?

    hi anyone know how to do in AI ? thanks
  11. han7681

    why i cant merge ?

    hi thanks for answer.. but can you explain how to weld? i tried to expand , but cant press the expand button in pathfinder. thanks
  12. hi plz see the photo, the cutting is not correct position , set reg mark in signmaster 2 and send to graphtec cutter what went wrong? printer problem or cutter settling wrong? whole graphic size is 60* 20 cm ,, any idea? thanks
  13. hi i have few cutters with each pc to run. can one signblazer in one pc run many cutters? if yes, how to do ? any advice welcome thanks
  14. han7681

    can the signblazer run many cutters?

    hi thanks for answer , i manged to cut 2 cutters with one pc, but whenever cutting a new, do i need to change output device setting? for example. open a 2 sign blazer, then one is usb 1 output setting in signblazer , the other is usb2 output setting in signblazer , after cutting finish, usb1 always change into usb2., so have to change back to usb 1 when cutting a new one, how i can solve? how i can fix the usb out ? thanks
  15. han7681

    all mixed path line?

    thanks for replying i have PCUT CREATION.
  16. han7681

    all mixed path line?

    hi as u can see the photo, when i cut the image file, the knife goes everywhere. not follows the path. similar things have happened in Artcut,never in Signblazer. any idea? Untitled-1.eps Untitled-1.eps
  17. han7681

    CANT CUT SIMPLE SQUARE!!

    HI as shown the photos, one corner in square is not clean. i have chaged the offset from 0-7.0 square size is 5*5cm all same results... any idea why?
  18. han7681

    CANT CUT SIMPLE SQUARE!!

    hi im usuing a pcut creation
  19. han7681

    EDGE CUTTING

    hi offset from 2.5-4.0 it looks like the photos what is the problem? if offset is worng, it looks like this? or blade depth is wrong? help!!!
  20. han7681

    when importing the letters?

    hi after outline the letters in illustrator, importing then cutting but it cuts 2 times , it cuts and cuts again folllowing first line exactly any idea? why?
  21. han7681

    when importing the letters?

    thanks again, i just realized even when i type the word in sign cut, it cut 2 times. well , setting problem?
  22. han7681

    when importing the letters?

    thanks as showing the photos, i try to drag the letters, but i cant did i miss the point what u said? or i have to do in the illustratior?
  23. han7681

    when importing the letters?

    thanks for reply can u tell more ? how i can delet the layer?
  24. hi the path was fine in illustrator cs2 (photo bottom one) but when importing the artcut, it was not correct (photo upper one) anyidea why and how can i correct?
  25. hi how can i correct into straght line? i want to make it straight line ( angle 0) thanks Untitled-1.ai Untitled-1.ai