han7681
Members-
Content Count
45 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Everything posted by han7681
-
hi when i turned on the cutter, Novram Init message showed then , the cutter didnt move at all, even couldnt load , tried factory setting - hold up arrow key and power on , but nothing changed. anyone knows why and how i can sort it out? thanks
-
hi done factory resetting , but once power on , some weird things show on the screen , as below it is supposed to be 1st photo , any idea why? it may be cable problem? slightly damaged when it was pulled off. where i can this cable? thank
-
after factory reset, doesnt work !!!!
han7681 replied to han7681's topic in GraphTec Cutting Plotter Discussion
hi originally it showed "Novram Init " thanks -
the photo is attaced. cant control any. , im using signblazer have to change motherboard? it it is replaced, what is need to set?
-
hi i will print wall paper covering around 2x3 M as its size , will divide 3 or 4 section , overlapping 1 cm the photo size is 30 cmx28 cm (300dpi) 34.5 MB how to cut into 3 or 4 sections and change size and resolution in photoshop? thanks
-
how to divide the photo and change resolution to print?
han7681 replied to han7681's topic in Printers
hi i have roland rs 640 and versa works will print on oracle 3268 vinyl thanks -
hi as showing on the photo. http://cafeptthumb3....y.jpg?type=w740 it is very thin plastic sheet , how do you call it and when we can get it? i guess it cut by Silhouette Cameo. can it be cut by normal cutter like ce-5000? thanks
-
hi the photo is attached
-
hi i cant merge with the butterfly body with other part. how i can make one object? any idea? thanks butterfly body.eps
-
hi anyone know how to do in AI ? thanks
-
hi thanks for answer.. but can you explain how to weld? i tried to expand , but cant press the expand button in pathfinder. thanks
-
contour cut and signmaster 2 cutting error?
han7681 posted a topic in GraphTec Cutting Plotter Support Requests
hi plz see the photo, the cutting is not correct position , set reg mark in signmaster 2 and send to graphtec cutter what went wrong? printer problem or cutter settling wrong? whole graphic size is 60* 20 cm ,, any idea? thanks -
hi i have few cutters with each pc to run. can one signblazer in one pc run many cutters? if yes, how to do ? any advice welcome thanks
-
hi thanks for answer , i manged to cut 2 cutters with one pc, but whenever cutting a new, do i need to change output device setting? for example. open a 2 sign blazer, then one is usb 1 output setting in signblazer , the other is usb2 output setting in signblazer , after cutting finish, usb1 always change into usb2., so have to change back to usb 1 when cutting a new one, how i can solve? how i can fix the usb out ? thanks
-
thanks for replying i have PCUT CREATION.
-
hi as u can see the photo, when i cut the image file, the knife goes everywhere. not follows the path. similar things have happened in Artcut,never in Signblazer. any idea? Untitled-1.eps Untitled-1.eps
-
HI as shown the photos, one corner in square is not clean. i have chaged the offset from 0-7.0 square size is 5*5cm all same results... any idea why?
-
hi im usuing a pcut creation
-
hi offset from 2.5-4.0 it looks like the photos what is the problem? if offset is worng, it looks like this? or blade depth is wrong? help!!!
-
hi after outline the letters in illustrator, importing then cutting but it cuts 2 times , it cuts and cuts again folllowing first line exactly any idea? why?
-
thanks again, i just realized even when i type the word in sign cut, it cut 2 times. well , setting problem?
-
thanks as showing the photos, i try to drag the letters, but i cant did i miss the point what u said? or i have to do in the illustratior?
-
thanks for reply can u tell more ? how i can delet the layer?
-
hi the path was fine in illustrator cs2 (photo bottom one) but when importing the artcut, it was not correct (photo upper one) anyidea why and how can i correct?
-
hi how can i correct into straght line? i want to make it straight line ( angle 0) thanks Untitled-1.ai Untitled-1.ai