han7681

hi if the line ls not smooth as shown in the photo,will the cutting edge be smooth or not? and how can i make it smooth? thanks!

hi i set like the photos every unit is cm but actual cutting is converted into inch setting is 3cm*4cm but actual cutting is 3 inch * 4 inch. how i can change the setting?

hi the edge of cutting is not smooth, looks like gear. straight line is ok , but / , lines are not good at all. any idea!!! thanks another test2.ai another test2.ai

hi is it too much or less?

hi what can i set to correct size? circle size is 3cm *3cm, scale is 50% but the resuilt was nearly 4cm.. and do i need 60 degree blade to cut 3cm ? thanks

if 100% size was around 8cm weird!!!

thanks this is the file. test.ai test.ai

hi every edge is not smooth, what is the problem? because of the file or cutter or sign bladzer? do i use too many or less construction point? test.ai test.ai

hi the flower is black. but there are some white area in black flower how i can cut? it doent show the white color in cutting menu. but,if it is small, it works fine.

dear jay thaaaaaaaaaaaaaaaaaaaanks alooooooooooooooooot.

thanks flower.ai flower.ai

thanks for reply actually i want cut like below photo but i cant cut the white part in the flower. there is no white color menu to press.

HI IM CUTTING A VINYL STICKER LIKE THE PHOTO, THE EDGE IS NOT SMOOTH, IT LIKES LIKE A GEAR. HOW CAN I SET THE CUTTER?

thans for replying actually im correcting the file. the lines are not straight. i want to make all straight. thanks Untitled-3.ai Untitled-3.ai

thanks for replying im setting a force and speed. when i set v: 60-70 F: 30, it seems ok for cutting a nomal vinyl but the manual says it normally v :60, F : 100-150 wonder my setting is not correct? thanks

hi thanks for ur instructions i have got few things not to understand. all u mean in blade depth is like the photo i attached? or is there another setting i need to do? and when you place blade carriage into carriage arm, how much gap do i leave between blade and bottom? blade need to touch the bottom or slightly up from the bottom ? ( vinyl thickness) thanks

dear ben thanks for that!! if the file is not a problems, what is the problem with the cutter? i thought it might be too many construction point. i just bought the cutter a week ago. everything is new.. that was my first cutting very disappointed with the first cutting,,,

and what is the compensation? "For some kind of cutter plotter, it is necessary to set compensation for the purpose of making cut letters more smoother. In The Software, there are two kinds of compensation: Close and Sharp Angle compensation. Generally, the compensation value is between 3 mm to 5 mm." (from its help) does it really matter to cut smooth?

i saved as Illustrator eps 8.0 version then importing in the art cut. it seems fine in the monitor. but when cutting, all paths are mixed. any idea why? and how to correct?

im using us fine cutter and sign cut and art cut. both soft ware are same. looks like the photo. head.ai head.ai