Stuck On Gaming

Hey everyone. New to this so if it has been covered in another thread sorry for the repost. I'm trying to find which transfer tape would be the best for designs that have small pieces in the design. The transfer tape I use now works but when I use it on a small intricate design the vinyl comes up with the transfer tape. Any suggestions? I'm using oracal 651 to place on car Windows. And I'm not sure what brand transfer tape. It's something I got on Amazon. Thanks in advance.

Thanks for the replies. Has anyone used The Greenstar application tape?

As statebefore I'm using Oracal 651. I'm not too concerned with "clear" vs masking tape like transfer tape. I just want to make sure that myself or my customers don't run into problems like the vinyl getting peeled up with the transfer tape, specially with smaller designs.

Figured out what the problem was. I was setting up my workspace on my computer to 12 inches because that's the size vinyl I was using. The machine is only capable of working in a 10 inch wide area. Every time it would go to the left it would reset the boundaries and cut/plot lines on top of each other.

New to cutting. I looked on here for an answer and couldn't find it. I'm using a uscutter MH 14inch. The problem I'm having is when I send a project to the cutter it cuts perfect on the right side of the vinyl but on the left it starts overlapping cuts. If I were to cut for example "ABCDEFG" horizontally from end to end on the vinyl the letters "ABC" would be cut on top of each other and the "DEFG" would be perfect. Is it SCAL Pro or is it my cutter. I try cutting in origin mode and WYSIWYG and still the same result.

Called uscutter tried to trouble shoot and also tried using Sign Blazer and still getting the same result. Uscutter thinks it's the motherboard on the cutter. Going to try using my desktop (Windows Vista) instead of my laptop (Windows 7). If anyone else has a suggestion I'll give it a try.

I only just started cutting. The only program I have is SCAL pro. It came with my cutter. Is SignBlazer free?