Rockon100

I have it working good now....... I striped everything off and reinstalled everything, now it is working better than it ever has. Cutting good and weeding easy. I would like to thank everyone for the help and input.

I have a feeling that I am using the driver for the Pcut ct 630, atleast that is what shows up in the production manager window..

I can't find my pen, but I measured the stuff I cut yesterday and they are right on the money in size. Refresh me on where to check to see which drivers that I have, I first set this up last winter.

Thanks I will look into that shortly, What is troubling me is that no matter what I have the offset set at nothing appears changed. Speedoggy Where are you located? I live in Anderson.

Paco Thank you for the tip. However I have already tried changing the offset, I have tried using everything from 0 to the maximum of .100 and nothing appears different at all in the cut. I am starting to wonder if I have a setting somewhere else that may be set wrong.

Yes that is exactly like mine, you adjust the setting in the production manager. I am using Flexi Pro 7.5.

It is in the Production manager, I don't see anywhere in Flexi that you can set the blade offset.

Mine is in inches, it is currently set at .020 which is .50 in MM. I have tried and set everything that I know to try. I have even checked the unit for play.

Are you sure? My program won't even let me enter a number greater than .100

Thanks. I think you meant .025. I have tried everything from 0 to .080 and nothing has made any difference at all. I know that I have to be overlooking something.

I have a LP and I am using Flexi Pro. I got the LP last year and have not tried it much, when I first used it I was unable to get the gaps to close up right and the corners are rounded. I just started to use this unit again and I have the same issues. I have had the blade offset set from 0 to .080 and nothing appears to be different at all, I have adjusted the cutting speed up and down as well and nothing ever appears to change anything. I have very closely inspected and cleaned the blade holder. This unit has not cut right since I opened the box. I don't know what to try next. Any help would be greatly appreicated.