bigmax

Late response but, I did this: in file search entered *.sbd then sent all these files t a thumb drive and ALL my sign blazer saved files are in one place. Did the same thing for eps files: *.eps (select all then send to flash/thumb drive.

Could someone please tell me how to select a single item from a page of graphic images? I can not seem to get it. Thanks in advance for the help.

THANKS MZ SKEETER I'll give that a shot.

Finally was able to order Titan 2 with Vinyl Master LTR. First job layout done and customer wanted different font on one section. I cannot "select" that word so I can convert to another font. Guidance PLEASE on how to do this.

Thanks . Problem resolved. After working on SBE for so long, Vinyl Master LTR is a whole new "can o worms". BTW the Titan 2 is sweeeeeet. Just played around a little with it but feels like I went from a Yugo to a BMW. Awesome. Thanks AGAIN for the help !!!

Just wanted to say "Thanks" to everyone for their posts,suggestions, answers and general help. So often I'll cruise through the posts, find something interesting or needed and fail to say THANK YOU so..............THANK YOU !!!!!

It's a "Canebreak" rattlesnake I caught a while back. Catch them & usually skin them. The have a pinkish tone to their skin. Have caught maybe.....20-25 rattlers over the years.

Hope everyone has a HAPP and SAFE Holiday. Finally able to step up and ordered new TITAN 2 cutter. Really looking forward to using it !!

Thanks for sharing !

Need a little help. Anyone willing to share vector of a WHITE husky. Can't get photo to trace well enough to use. Thanks in advance !

Nice job

Replaced cutting strip on US Cutter SC model (after removing old strip and cleaning GOOD with denatured alcohol). Now I CAN'T get an even cutting depth. When the blade travels across the 24" width, it cuts all the way through the vinyl and backing in some spots and barley "scratches" in other spots. ANY ideas ? Don't want to have to replace (BUY) another strip!!! All suggestions appreciated!!

never done any "heatpressing". Afriend in the printing business Wwho also does a lott of signsand graphics gave me an INSTA press model 715. He said itt didn't work. Brought it tto my shop, lubricaled the bottom ram, swing away top and it all works. He didn't realize that air had to be connected to operate. Questtion is, the micro (limit) swittch is broken and when butttons are pressed, nothing happens. There is a red butttton on tthe air manifold when depressed, acttivatted the lower plattten. Anyone familuar enough with this product to advise. Seems to be a realy heavy dutty machine. Thanks in advance for any help !

Hey Ya'll. Just wanted to say thank you again to all who tried to help me get going again. I HAVE ABOUT GONE TOTALLY NUTS for the past several days trying to figure out why my cut was coming out 5-8" longer that setting. Well, after US Cutter sent a new carriage that didn't solve the original problem,( the cutting blade pressure. They sent me a new motherboard which I replaced and the cutting pressure would work then stop. ? I checked settings (ALL) uninstalled and re-installed Sign Blazer 4 times, followed advice from Slice & Dice and some others with no success. SO........I went back to check the pressure issue and found loose wire on carriage (electro magnet) reattached and secured it and pressure issue resolved. Decided to try another computer( older laptop) with Sign Blazer and same problem with the cut length being TOO LONG per setting.. I then put the old motherboard back in , what did I have to lose, right? put back together, set everything up to cut and .............BACK IN BUSINESS!!! Cutting like the first day used. GO FIGURE. Anyway THANK YOU ALL!!!! All this frustration over a tiny loose wire. Hope NOBODY has the aggravation that I went through this past couple of weeks over something so simple. DDUUUHHHH

When using sign blazer, SC model 631E cutter, how to get cutter set correctly. It's showing Li-Lu SF631 with serial adapter /COM4. It's cutting but still cutting TOO LONG by about 4" set at 48" but cutting 54". Do I need to select another cutter? PLEASE ADVISE. It was suggested that I try another program but don't want to have to re-learn after using sign blazer so long. I uninstalled and re-installed SB and still same. H E L P !!!!

Thanks to ALL who have responded. I've been away for a couple of days, but will try again today to get back on track. Again THANK YOU ALL !!

thanks for the reply. checked the settings and all "seems" to be in order. GOING NUTS HERE !!

Will do and thanks again !!!

PLEASE HELP! After getting new carriage and motherboard for my SC 631E using sign blazer / windows 7 with serial adapter, my workspace set at 30x48. When I cut it cuts it at 54" long. PLEASE........somebody help !?! I uninstalled SB and reinstalled......no change.

downloaded & tried signcut trial................? gotta learn a new program just extremely frustrated!!! Can't get signpro to cooperate. LOL OLd dogs, new tricks thing I guess

It's the same keyspan that I've been using.I'll try the signcut trial. Thank You !!

Sorry for delay, but tried cutting size correction and no luck. Uninstalled and re installed SB and same. GOING NUTs HERE !! Just don't understand what's wrong !

"through rain or shine...." don't say anything about size huh? lol

I finally got my SC model back to working but now when I cut using Sign Blazer, the first design , an arrow with "ENTRANCE" PUNCHED THORUGH the layout shows the arrow being 15x43 but actually cuts it 18.5 x 51". Please advise me on what causes this.Thanks in advance !!

Well ya'll, I can't say enough about how GOOD U S Cutter has been to me on my SC model. Finally back to cutting!! I must say these guy went WAY WAY" ABOVE AND BEYOND " helping my get back going again. I have a really small , small one man operation and couldn't afford to upgrade like I wanted to but, this will hopefully allow me to complete a couple of good jobs and step up to a TITAN 2 or like machine (FROM US CUTTER) THANKS AGAIN!!!!!!!